Actuator driving force analysis and modelling of TRR-XY PKM
نویسندگان
چکیده
The main aim of this work is to investigate the actuator driving force variations of a parallel kinematic machine (PKM) for different cutting paths. To meet this aim, a TRR-XY ve-degrees-of-freedom (5DOF) PKM was selected and built for this research, and a dynamic analysis model of the PKM was developed. Here, ‘T’ stands for translational DOF and ‘R’ stands for rotational DOF of the platform. In this research, the dynamic analysis and modelling for the TRR-XY PKM are derived on the basis of the Denavit– Hartenberg (D–H) notation method. The parametric tool concept and Lagrange equation theory are also included in the derivation. The actuator driving force variations for different cutting paths are obtained using the developed dynamic modelling. Five cutting paths are selected to represent the possible cutting paths inside the workspace. The obtained actuator driving force variations on A, B, C chains are useful for obtaining a good dynamic performance PKM machining application. The main results show that the required actuator driving forces are mainly affected by the inclination angle, f, of the tool platform. The angular acceleration of the tool platform has only very little effect. For obtaining a better PKM machining application, a working space with smaller f is recommended.
منابع مشابه
Flexible Foot/Ankle Based on PKM with Force/Torque Sensor for Humanoid Robot
This paper describes the development of a novel humanoid robot foot/ankle based on an orientation Parallel Kinematic Mechanism for intelligent and flexible control. With three identical Universal-Prismatic-Spherical prismatic-actuated limbs and a central Universal-Revolute passive limb, the PKM can perform three degrees of freedom rotation motions. In order to enable the humanoid robot safely t...
متن کاملAnalytical modelling of the eVects of manufacturing errors on the accuracy for a TRR±XY hybrid parallel link machine tool
Using a parallel link mechanism as the basic structure of the parallel link machine tool is a new design concept and has become one of the most important research ®elds and attracts many previous researchers. However, the application of these machines as a machine tool has not proven itself in terms of accuracy enhancement over traditional machine tools. In general, the geometry of the machine ...
متن کاملRedundant Actuation of Parallel Manipulators
High stiffness, low inertia, large accelerations, and high precision are desirable properties attributed to parallel kinematics machines (PKM). However, relatively small workspace and the abundance of singularities within the workspace partly annihilate the aforementioned advantages. Redundant actuation and novel redundant kinematics are means to tackle these shortcomings. Redundant parallel ki...
متن کاملPossibility of the Solid-Fluid Transition in Moving Periodic Systems
The steady sliding state of periodic structures such as charge density waves and flux line lattices is numerically studied based on the three dimensional driven random field XY model. We focus on the dynamical phase transition between plastic flow and moving solid phases controlled by the magnitude of the driving force. By analyzing the connectivity of co-moving clusters, we find that they perc...
متن کاملModeling and modal analysis to oscillations of IPMC cantilever beam and simulating as an actuator
The purpose of this article is modal analysis of ionic polymer metal composite beams, then briefing the system to the unique parameters to help in up modeling of the actuator. In this paper at first using of Mathematical analysis and Closed form transfer function of cantilever beam dynamic response to the forces of different inputs (intensive and continuous) is calculated and for different type...
متن کامل