Tolerances in X-band Main Linacs of Future Linear Colliders

نویسندگان

  • T. Higo
  • K. Kubo
چکیده

Tracking simulations have been performed for a realistic design of main linacs of X-band linear collider. We discuss about choice of the phase of the accelerating field relative to the bunches. The tolerances of the phase and the amplitude errors are studied.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Parameter Optimization for the Low Frequency Linacs in the Nlc ∗

In the present Next Linear Collider (NLC) design, S and L-band linacs are used to accelerate the beams to 10 GeV, where they are injected into the main X-band linacs. As injectors for the main accelerator, these linacs are required to deliver clean beams while being reliable and cost effective. These requirements set stringent tolerances on the design of the accelerators. There are two types of...

متن کامل

Resonant Collimation for Future Linear Colliders

We present a s c heme for collimating large amplitude particles in the main linacs of a linear collider, by adding octupoles to the FODO lattice of the linac. The requirements on downstream collimation can in this way begreatly reduced or perhaps even eliminated. An analytic estimate of the amplitude at which particles are lost is made by calculating the separatrix of the fourth order resonance...

متن کامل

Fabrication and Tolerance Issues and their Influence on Multi-Bunch BBU and Emittance Dilution in the Construction of X-Band RDDS Linacs for the NLC

The main linacs of the Next Linear Collider (NLC) will contain several thousand X-band RDDS (Rounded Damped Detuned Structures). The transverse wakefield in the structures is reduced by detuning the modal frequencies such that they destructively interfere and by four damping manifolds per structure which provide weak damping. Errors in the fabrication of the individual cells and in the alignmen...

متن کامل

Dipole Mode Detuning in the Nlc Injector Linacs

A major consideration in the design of the accelerator structures in the injector linacs of the JLC/NLC[1] is to keep the wakefield effects within tolerances for both the nominal (2.8 ns) and alternate (1.4 ns) bunch spacings. One important multi-bunch wakefield effect is beam break-up (BBU), where a jitter in injection conditions of a bunch train is amplified in the linac; another is static em...

متن کامل

Waveguide System ‘ to Accelerator I Cavities Multiplier

Proposed future positron-electron linear colliders’ would be capable of investigating fundamental processes of interest in the 0.5-5 TeV beam-energy range. At the SLAC Linear Collider (SLC) gradient of about 20 MV/m this would imply prohibitive lengths of about 50-250 kilometers per linac. We can reduce the length by increasing the _ gradient but this implies high peak power, on the order of 40...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1999