Reconstruction of source location in a network of gravitational wave interferometric detectors
نویسندگان
چکیده
This paper deals with the reconstruction of the direction of a gravitational wave source using the detection made by a network of interferometric detectors, mainly the LIGO and Virgo detectors. We suppose that an event has been seen in coincidence using a filter applied on the three detector data streams. Using the arrival time (and its associated error) of the gravitational signal in each detector, the direction of the source in the sky is computed using a χ minimization technique. For reasonably large signals (SNR>4.5 in all detectors), the mean angular error between the real location and the reconstructed one is about 1◦. We also investigate the effect of the network geometry assuming the same angular response for all interferometric detectors. It appears that the reconstruction quality is not uniform over the sky and is degraded when the source approaches the plane defined by the three detectors. Adding at least one other detector to the LIGO-Virgo network reduces the blind regions and in the case of 6 detectors, a precision less than 1◦ on the source direction can be reached for 99% of the sky. PACS numbers: 04.80.Nn, 07.05.Kf
منابع مشابه
Coherent Bayesian inference on compact binary inspirals using a network of interferometric gravitational wave detectors
Presented in this paper is the description of a Markov chain Monte Carlo (MCMC) routine for conducting coherent parameter estimation for interferometric gravitational wave observations of an inspiral of binary compact objects using multiple detectors. Data from several interferometers are processed, and all nine parameters (ignoring spin) associated with the binary system are inferred, includin...
متن کاملGravEn: Software for the simulation of gravitational wave detector network response
Physically motivated gravitational wave signals are needed in order to study the behavior and efficacy of different data analysis methods seeking their detection. GravEn, short for Gravitational-wave Engine, is a MATLAB r © software package that simulates the sampled response of a gravitational wave detector to incident gravitational waves. Incident waves can be specified in a data file or chos...
متن کاملBenefits of Artificially Generated Gravity Gradients for Interferometric Gravitational-Wave Detectors
We present an approach to experimentally evaluate gravity gradient noise, a potentially limiting noise source in advanced interferometric gravitational wave (GW) detectors. In addition, the method can be used to provide sub-percent calibration in phase and amplitude of modern interferometric GW detectors. Knowledge of calibration to such certainties shall enhance the scientific output of the in...
متن کاملGEO 600: building a gravitational wave observatory
An international network of laser-interferometric gravitational wave detectors is nearing the end of the main commissioning phase and will soon enter into an extended observational period, collecting data for a duration of order one year. This article outlines the construction, design and commissioning of the GEO 600 gravitational wave observatory. GEO 600 is a laserinterferometric gravitationa...
متن کاملAngular Resolution of A Network of Gravitational-Wave Detectors and Localization Methods
Abstract. We report for the first time a general geometrical expression for the angular resolution of an arbitrary network of interferometric gravitational wave (GW) detectors when the arrival-time of a GW is unknown. We discuss the implications of our results on how to improve angular resolutions of the network. An example of an improved localization method for GWs of unknown waveforms is demo...
متن کامل