Probing the nanoscale Schottky barrier of metal/semiconductor interfaces of Pt/CdSe/Pt nanodumbbells by conductive-probe atomic force microscopy.

نویسندگان

  • Sangku Kwon
  • Seon Joo Lee
  • Sun Mi Kim
  • Youngkeun Lee
  • Hyunjoon Song
  • Jeong Young Park
چکیده

The electrical nature of the nanoscale contact between metal nanodots and semiconductor rods has drawn significant interest because of potential applications for metal-semiconductor hybrid nanostructures in energy conversion or heterogeneous catalysis. Here, we studied the nanoscale electrical character of the Pt/CdSe junction in Pt/CdSe/Pt nanodumbbells on connected Au islands by conductive-probe atomic force microscopy under ultra-high vacuum. Current-voltage plots measured in contact mode revealed Schottky barrier heights of individual nanojunctions of 0.41 ± 0.02 eV. The measured value of the Schottky barrier is significantly lower than that of planar thin-film diodes because of a reduction in the barrier width and enhanced tunneling probability at the interface.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Engineering Reaction Kinetics by Tailoring the Metal Tips of Metal-Semiconductor Nanodumbbells.

Semiconductor-metal hybrid nanostructures are one of the best model catalysts for understanding photocatalytic hydrogen generation. To investigate the optimal structure of metal cocatalysts, metal-CdSe-metal nanodumbbells were synthesized with three distinct sets of metal tips, Pt-CdSe-Pt, Au-CdSe-Au, and Au-CdSe-Pt. Photoelectrochemical responses and transient absorption spectra showed that th...

متن کامل

Nanoscale characterization of electrical transport at metal/3C-SiC interfaces

In this work, the transport properties of metal/3C-SiC interfaces were monitored employing a nanoscale characterization approach in combination with conventional electrical measurements. In particular, using conductive atomic force microscopy allowed demonstrating that the stacking fault is the most pervasive, electrically active extended defect at 3C-SiC(111) surfaces, and it can be electrical...

متن کامل

X-ray photoemission determination of the Schottky barrier height of metal contacts to n–GaN and p–GaN

Synchrotron radiation-based x-ray photoemission spectroscopy was used to study the surface Fermi level position within the band gap for thin metal overlayers of Au, Al, Ni, Ti, Pt, and Pd on n–GaN and p–GaN. Nonequilibrium effects were taken into account by measuring the Fermi edge of the metal overlayer. There are two different behaviors observed for the six metals studied. For Au, Ti, and Pt,...

متن کامل

Graphite/InP and graphite/GaN Schottky barriers with electrophoretically deposited Pd or Pt nanoparticles for hydrogen detection

Large attention has been devoted worldwide to the investigation of hydrogen sensors based on various Schottky diodes. We prepared graphite semimetal Schottky contacts on polished n-InP and n-GaN wafers partly covered with nanoparticles of catalytic metals Pd or Pt by applying colloidal graphite. Metal nanoparticles were deposited electrophoretically from colloids prepared beforehand. Deposited ...

متن کامل

Vertically aligned CdSe nanowire arrays for energy harvesting and piezotronic devices.

We demonstrated the energy harvesting potential and piezotronic effect in vertically aligned CdSe nanowire (NW) arrays for the first time. The CdSe NW arrays were grown on a mica substrate by the vapor-liquid-solid process using a CdSe thin film as seed layer and platinum as catalyst. High-resolution transmission electron microscopy image and selected area electron diffraction pattern indicate ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nanoscale

دوره 7 29  شماره 

صفحات  -

تاریخ انتشار 2015