Tensile failure mechanisms in synthetic fibre-reinforced mortar
نویسنده
چکیده
The ultimate tensile behaviour of fibre-reinforced cementitious composites is closely related to its failure mechanisms which in turn are dependent on reinforcement parameters such as fibre characteristics and the fibre/matrix interface properties. Based on the direct tensile tests of mortar specimens reinforced with various synthetic fibres, this paper attempts to explain such relationships and to indicate directions towards more effective fibre reinforcement.
منابع مشابه
Mechanical Properties of Fibre Reinforced Concrete - A Comparative Experimental Study
This paper in essence presents comparative experimental data on the mechanical performance of steel and synthetic fibre-reinforced concrete under compression, tensile split and flexure. URW1050 steel fibre and HPP45 synthetic fibre, both with the same concrete design mix, have been used to make cube specimens for a compression test, cylinders for a tensile split test and beam specimens for a fl...
متن کاملInfluence of Fibre Content on Crack Propagation Rate in Fibre-Reinforced Concrete Beams
Experimental study on the influence of fibre content on crack behaviour and propagation in synthetic-fibre reinforced beams has been reported in this paper. The tensile behaviour of metallic fibre concrete is evaluated in terms of residual flexural tensile strength values determined from the load-crack mouth opening displacement curve or load-deflection curve obtained by applying a centre-point...
متن کاملFailure Mode and Analysis of the Bonded/bolted Joints between a Hybrid Fibre Reinforced Polymer and Aluminium Alloy
Composites are being used extensively in several engineering applications. However, the efficiency of the joints used in joining composites and metals can be improved. To move towards a sustainable and environment friendly future, natural fibre composite material was used. Towards the above objective, research work was carried out for the assembly between a composite and aluminium. Three differ...
متن کاملMechanical Properties of Hybrid Fibre Reinforced Concrete With Steel And
The experimental study deals with Hybrid fibre reinforced concrete with the use of (Polypropylene and Recycled polyethylene terephthalate RPET). The M40 grade concrete used was designed by using IS10262-2009 code. The steel fibre and synthetic fibre were added at the volume fractions up to 0.5%. Test results showed that the fibres, when used in a hybrid form, could result in superior composite ...
متن کاملStructural Behavior of Fiber
An indirect J-integral technique for measuring the tension softening curve of non-yielding materials like concrete is presented and is applied to mortars reinforced with various short fiber types (steel and synthetic). The tension softening curve serves to characterize and measure material fracture resistance. The dependence of structural behavior on material fracture resistance is investigated...
متن کامل