High Yield Exfoliation of WS2 Crystals into 1-2 Layer Semiconducting Nanosheets and Efficient Photocatalytic Hydrogen Evolution from WS2/CdS Nanorod Composites.

نویسندگان

  • Danyun Xu
  • Pengtao Xu
  • Yuanzhi Zhu
  • Wenchao Peng
  • Yang Li
  • Guoliang Zhang
  • Fengbao Zhang
  • Thomas E Mallouk
  • Xiaobin Fan
چکیده

Monolayer WS2 has interesting properties as a direct bandgap semiconductor, photocatalyst, and electrocatalyst, but it is still a significant challenge to prepare this material in colloidal form by liquid-phase exfoliation (LPE). Here, we report the preparation of 1-2 layer semiconducting WS2 nanosheets in a yield of 18-22 wt % by a modified LPE method that involves preintercalation with substoichometric quantities of n-butyllithium. The exfoliated WS2 nanosheeets are n-type, have a bandgap of ∼1.78 eV, and act as a cocatalyst with CdS nanorods in photocatalytic hydrogen evolution using lactate as a sacrificial electron donor. Up to a 26-fold increase in H2 evolution rate was observed with WS2/CdS hybrids compared with their pure CdS counterpart, and an absorbed photon quantum yield (AQE) of >60% was measured with the optimized photocatalyst.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication of single-layer MS2 (M=Mo, W) nanosheets using Li battery setup

Lithium intercalation is a convenient method to prepare few-layer and single-layer MS2 (M=Mo, W) nanosheets. This method is, however, very time-consuming (few days) and it is difficult to control the reaction parameters. To overcome these drawbacks, we have proposed a method to use an Li battery set-up to significantly reduce the reaction time (few hours) and electrochemically intercalate lithi...

متن کامل

Two-dimensional hybrid nanosheets of tungsten disulfide and reduced graphene oxide as catalysts for enhanced hydrogen evolution.

Composite materials: Tungsten disulfide and WS2 /reduced graphene oxide (WS2 /rGO) nanosheets were fabricated by hydrothermal synthesis using tungsten chloride, thioacetamide, and graphene oxide (GO) as starting materials. The WS2 nanosheets are efficiently templated on the rGO layer. The WS2 /rGO hybrid nanosheets show much better electrocatalytic activity for the hydrogen evolution reaction t...

متن کامل

Facile Synthesis of Heterostructured WS2/Bi2MoO6 as High-Performance Visible-Light-Driven Photocatalysts

In this paper, novel WS2/Bi2MoO6 heterostructured photocatalysts were successfully fabricated via a facile solvothermal growth method using pre-exfoliated layered WS2 nanoslices as a substrate. The structure, morphology, and optical properties of the as-prepared WS2/Bi2MoO6 samples were characterized by XRD, XPS, SEM, TEM (HRTEM), and UV-vis diffuse reflectance spectra (DRS). Results confirmed ...

متن کامل

Photoluminescence from liquid-exfoliated WS2 monomers in polymer composites

While liquid phase exfoliation can be used to produce nanosheets stabilized in polymer solutions, very little is known about the resultant nanosheet size, thickness or monolayer content. Here we use semi-quantitative spectroscopic metrics based on extinction, Raman and photoluminescence (PL) spectroscopy to investigate these parameters for WS2 nanosheets exfoliated in aqueous polyvinylalcohol (...

متن کامل

Preparation of Liquid-exfoliated Transition Metal Dichalcogenide Nanosheets with Controlled Size and Thickness: A State of the Art Protocol.

We summarize recent advances in the production of liquid-exfoliated transition metal dichalcogenide (TMD) nanosheets with controlled size and thickness. Layered crystals of molybdenum disulphide (MoS2) and tungsten disulphide (WS2) are exfoliated in aqueous surfactant solution by sonication. This yields highly polydisperse mixtures containing nanosheets with broad size and thickness distributio...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • ACS applied materials & interfaces

دوره 10 3  شماره 

صفحات  -

تاریخ انتشار 2018