Experimental Testing and Mathematical Modeling of the Interconnected Hydragas Suspension System
نویسندگان
چکیده
The Moulton Hydragas suspension system improves small car ride quality by interconnecting the front and rear wheel on each side of the vehicle via a hydraulic fluid pipe between the front and rear dampers. A Hydragas system from a Rover Group MGF sports car was statically and dynamically tested to generate stiffness and damping coefficient matrices. The goal was to develop the simplest possible model of the system for use in ride quality studies. A linear model showed reasonable accuracy over restricted frequency ranges. A second model used bilinear spring and damping constants, and was more accurate for predicting force at both the front and rear units for frequencies from 1 to 8 Hz. The Hydragas system static stiffness parameters, when used in the model, caused peak force underprediction in the jounce direction. The bilinear model required increased jounce stiffness to account for hysteresis in the rubber elements of the system, and dynamic fluid flow phenomena.
منابع مشابه
Stability investigation of hydraulic interconnected suspension system of a vehicle with a quaternion neural network controller
Using hydraulic interconnected suspension (HIS) system to improve the stability of the vehicles is a matter of recent interest of many scholars. In this paper, application of this kind of suspension system and its impact on the stability of the vehicle are studied. The governing dynamic relations of the system are presented, using free body diagram, Newton-Euler motion equations, and relations ...
متن کاملModeling of a rail suspension system to investigate vertical vibration and effective parameters on it
Railways as a dimension of transportation infrastructure has been widely welcomed in developed and developing industrial countries because of the ability to carry heavy loads over long distances, more safety, less depreciation, less cost, less pollution, etc. Therefore, knowledge of the dynamic behavior of the railway is essential for designers and builders. It is very important to study the vi...
متن کاملDeveloping a Model for Measuring Severity of Effects Caused by Interconnected Units in Electronic Supply Chains
For many electronic supply chain networks in the world that can comprise hundreds ofcompanies with several tiers of suppliers and intermediate customers, there are numerous presentingrisks to consider. In the electronic supply chain, the situation are even worse, for the characteristics ofthis supply chain: excessive lean management, global sourcing and the rather more uncertain marketdemand. E...
متن کاملReliability analysis of suspension bridges against buffeting failure
A reliability analysis of suspension bridges against buffeting failure due to gustiness of wind velocity is carried out using the concept of PRA (probabilistic risk analysis) procedure. For this purpose, the bending stresses at the critical nodes of the bridge deck are obtained for buffeting forces using a spectral analysis technique and a finite element approach. For the purpose of reliability...
متن کاملKinetics analysis of electrophoretic deposition using small signal and large signal modeling, Case study: Nano-Mullite suspension
Having sufficient and accurate understanding about kinetics of phenomena, could be an important reason for further technological progresses. Finding a white-box mathematical model for weight vs. time curves of Electrophoretic Deposition (EPD) using large and small signal analysis has been studied thoroughly in the present investigation. Weight-Time curves of nano-Mullite suspension have been tr...
متن کامل