Selective Laser Sintering of Nano Al2O3 Infused Polyamide
نویسندگان
چکیده
Nano Al₂O₃ polyamide composites are evaluated for processing by selective laser sintering. A thermal characterization of the polymer composite powders allowed us to establish the possible initial settings. Initial experiments are conducted to identify the most suitable combinations of process parameters. Based on the results of the initial trials, more promising ranges of different process parameters could be identified. The post sintering characterization showed evidence of sufficient inter-particle sintering and intra-layer coalescence. While the inter-particle coalescence gradually improved, the porosity levels slightly decreased with increasing laser power. The nano-filler particles tend to agglomerate around the beads along the solid tracks, possibly due to Van der Walls forces. The tensile stress results showed an almost linear increase with increasing nano-filler content.
منابع مشابه
Sintering Study of Polyamide 12 Particles for Selective Laser Melting
Selective Laser Melting is an additive manufacturing technique, using a laser to promote the fusion followed by the solidification of a powder bed into a component. One of the most interesting topics about this process is the coalescence behavior of particles taking place in the powder bed during exposure. The coalescence of particles has been investigated in different fields of materials. Poly...
متن کاملDevelopment of Polymer Nanocomposites for Rapid Prototyping Process
This paper presents initial development of polymer nanocomposites (PNC) material for rapid manufacturing (RM) application. PNC materials containing a polyamide (PA) and nano particles (5wt%) were produced by solution blending with the aim to improve the mechanical properties. Commercial polyamide 6 (PA6) was dissolved in formic acid (HCO2H) together with two different types of nano particle mat...
متن کاملMissing facial parts computed by a morphable model and transferred directly to a polyamide laser-sintered prosthesis: an innovation study.
Mirroring of missing facial parts and rapid prototyping of templates have become widely used in the manufacture of prostheses. However, mirroring is not applicable for central facial defects, and the manufacture of a template still requires labour-intensive transformation into the final facial prosthesis. We have explored innovative techniques to meet these remaining challenges. We used a morph...
متن کاملSelective Laser Sintering of Duraform Polyamide with Small-Scale Features
Selective Laser Sintering (SLS) has been used to make a fiber management module having very small feature size and ratios. Currently these modules are made out of Stereolithography using standard epoxy acrylate materials. SLS has been chosen to make these modules by the virtue of the material system it offers. The material system was chosen based on the flame retardant properties. The material ...
متن کاملThermal Influence of CNT on the Polyamide 12 Nanocomposite for Selective Laser Sintering.
The thermal influence of carbon nanotubes (CNTs) on the PA12 in the laser sintering process was assessed by physical experiments and a three dimensional simulation model. It appears that, by adding the CNTs into the PA12 matrix, the thermal conductivity increased. A double ellipsoidal heat flux model was applied to input a three dimensional, continuous moving, volumetric laser heat source. The ...
متن کامل