Design of Activated Carbon/Activated Carbon Asymmetric Capacitors
نویسندگان
چکیده
Supercapacitors are energy storage devices that offer a high power density and a low energy density in comparison with batteries. Their limited energy density can be overcome by using asymmetric configuration in mass electrodes, where each electrode works within their maximum available potential window, rendering the maximum voltage output of the system. Such asymmetric capacitors are optimized using the capacitance and the potential stability limits of the electrodes, with the reliability of the design largely depending on the accuracy and the approach taken for the electrochemical characterization. Therefore, the performance could be lower than expected and even the system could break down, if a well thought out procedure is not followed.
منابع مشابه
Dye Adsorption on the Blends of Saffron Petals Powder with Activated Carbon: Response Surface Methodology
One of the famous dyes is methylene blue (MB) which is a symbol of hazardous dyes. In this research, methylene blue was adsorbed using the blends of saffron petals with activated carbon. Five independent variables involving pH (2-13), contact time (5-270 min), saffron petals powder dosage (0.1-10 g/l), initial concentration of methylene blue solution (20-300 ppm) and activated carbon dosage (0....
متن کاملAdsorption of nitrate from aqueous solution using activated carbon-supported Fe0, Fe2 (SO4)3, and FeSO4
In this laboratory scale study, impregnated almond shell activated carbon was used as adsorbent to investigate its feasibility for nitrate adsorption from aqueous medium. The effects of activated carbon dosage and contact time have been examined in batch experiments. Experimental data show that impregnated activated carbons by Fe0, Fe2 (SO4)3, and FeSO4 were more effective than virgin almond ac...
متن کاملComparing activated carbon and magnetic activated carbon in removal of linear alkylbenzene sulfonate from aqueous solution by heterogeneous catalytic ozonation process
Activated carbon from pine cone (PCAC) was used as a precursor to prepare Fe3O4/magnetic activated carbon (MPCAC). Here, the removal of linear alkylbenzene sulfonate (LAS) was studied using catalytic ozonation process (COP) in exposure to MPCAC. Subsequently, it was compared with PCAC. Moreover, the effects of solution's initial pH, catalyst dosage, and the time of ozonati...
متن کاملModeling of Activated Carbon Preparation from Spanish Anthracite Based on ANFIS Structure
Carbon nanostructures are famous structures which are used in several industries such as separation, treatment, energy storage (i.e. methane and hydrogen storage), etc. A successful modeling of activated carbon preparation is very important in saving time and money. There are some attempts to achieve the appropriate theoretical modeling of activated carbon preparation but most of them were almo...
متن کاملUltrasonic Assisted Adsorption of Basic Dyes from Binary Component Systems onto ZnO Nanoparticles Loaded on Activated Carbon Derived from Almond Shell: Optimization by Central Composite Design
In this study, ZnO nanoparticles were loaded on activated carbon prepared from almond shell (ZnO-NP-AC). Then, this novel material applied as an efficient adsorbent for the ultrasonic assisted simultaneous removal of Basic Blue 41(BB41) and Basic Red 46 (BR46) in binary solution. The efficiency of proposed activated carbon was enhanced by acid treatment and subsequent modification by physical ...
متن کاملConventional steam activation for conversion of oil palm kernel shell biomass into activated carbon via biochar product
Conventional steam activation pyrolysis of waste materials such as oil palm kernel shell for production of biochar was investigated using central composite design. Conventional steam activation was carried out via an initial carbonization of oil palm kernel shell to obtain biochar and thereafter steam activation of the biochar using the conventional heating to produce activated carbon. Addition...
متن کامل