Optimization of properties of Inorganic Phosphate Cement (IPC) for construction and high-temperature applications

نویسنده

  • Mazen Alshaaer
چکیده

Inorganic Phosphate Cement (IPC) is a new cementitious material, developed at the Vrije Universiteit Brussel (VUB), which sets at room temperature. Due to its non-alkaline environment during and after setting and hardening, IPC can be combined with glass fibre reinforcement. Such a textile reinforced cementitious is an interesting material in those applications where high load-bearing capacity, good temperature resistance and lightweight construction are demanded.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of firing temperature on the properties of inorganic high temperature phosphate adhesive

High-temperature adhesives are considered for high-temperature applications such as the refractory industry. In this research, inorganic high-temperature phosphate-based adhesive was prepared using alumina and micro silica as the main raw materials and monoaluminum phosphate as a binder. The effect of firing temperature on the properties of the adhesive including phases, microstructure, compres...

متن کامل

Considerations of Well Cementing Materials in High-Pressure, High-Temperature Conditions (RESEARCH NOTE)

As worldwide demand of hydrocarbon is growing fast, the oil and gas companies have been forced to explore reservoirs with more hostile conditions, such as high-pressure, high-temperature conditions. Improved technology, material selection and testing procedures are required to overcome the common problems in these conditions. One of the main phases of well construction is cementing job. Appropr...

متن کامل

Optimization of time and temperature of dam construction for thermal analysis of RCC dam

In RCC dams, usually large amounts of concrete are poured in a short time that the heat generated by the cement hydration has led to an increase in temperature in the dam body. In this research, Abacus software, which is a finite element software, has been used for thermal analysis of the dam during construction and concreting. This is how thermal changes are applied. For the structure of 50 c...

متن کامل

Effect of organic and inorganic additives on some chemical properties of vermicompost, earthworm’s biomass and reproduction

ABSTRACT-The enrichment of bedding for vermicomposting systems with organic and inorganic additives is a technique which can promote the quality of produced vermicompost. Phosphate rock and fishmeal are two available and low-cost substances which can be provided easily and inoculation of vermicompost with phosphate solubilizing microorganisms (PSMs) can enhance the availability...

متن کامل

Investigation of the Effect of high Alumina Cement on the Properties of Foamed Alumina Insulation Bricks

The purpose of this study was to investigate the effect of high alumina cement and Sintering temperature on microstructure, physical and mechanical properties of foamed alumina insulation bricks. The Slurry samples  were prepared containing 75wt% of alumina and 25% wt of deionised water containing 1%, 3%, 5%, 7% wt% high Alumina cement and 2% wt% foam. Then samples were poured into metal molds....

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006