Lattice Boltzmann Simulation of Convective Heat Transfer from Heated Blocks in a Horizontal Channel
نویسندگان
چکیده
Lattice Boltzmann Simulation of Convective Heat Transfer from Heated Blocks in a Horizontal Channel Mohammed Amine Moussaoui a; Mohammed Jami a; Ahmed Mezrhab a; Hassan Naji b a Département de Physique, Faculté des Sciences, Laboratoire de Mécanique and Energétique, Oujda, Maroc b Laboratoire de Mécanique de Lille UMR CNRS, Université Lille 1-Sciences et Technologies/Polytech'Lille, Villeneuve d'Ascq cedex, France
منابع مشابه
Using Lattice Boltzmann Method to Investigate the Effects of Porous Media on Heat Transfer from Solid Block inside a Channel
A numerical investigation of forced convection in a channel with hot solid block inside a square porous block mounted on a bottom wall was carried out. The lattice Boltzmann method was applied for numerical simulations. The fluid flow in the porous media was simulated by Brinkman-Forchheimer model. The effects of parameters such as porosity and thermal conductivity ratio over flow pattern and t...
متن کاملLattice Boltzmann method for MHD natural convection of CuO/water nanofluid in a wavy-walled cavity with sinusoidal temperature distribution
In this paper, natural convection heat transfer of CuO-water Nanofluid within a wavy-walled cavity and subjected to a uniform magnetic field is examined by adopting the lattice Boltzmann model. The left wavy wall is heated sinusoidal, while the right flat wall is maintained at the constant temperature of Tc. The top and the bottom horizontal walls are smooth and insulated against heat and mass....
متن کاملMesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity
In the current study, non-Newtonian flow pattern and heat transfer in an enclosure containing a tilted square are examined. In order to numerically simulate the problem, the mesoscopic lattice Boltzmann method is utilized. The non-Newtonian Carreau-Yasuda model is employed. It is able to adequately handle the shear-thinning case. The simulation results of flow and heat transfer have been ...
متن کاملLattice Boltzmann Simulation of Nanofluids Natural Convection Heat Transfer in Concentric Annulus (TECHNICAL NOTE)
Abstract This study is applied Lattice Boltzmann Method to investigate the natural convection flow utilizing nanofluids in a concentric annulus. A numerical strategy presents for dealing with curved boundaries of second order accuracy for both velocity and temperature fields. The fluid between the cylinders is a water-based nanofluid containing different types of nanoparticles: copper (Cu), a...
متن کاملA Comparative Solution of Natural Convection in an Open Cavity using Different Boundary Conditions via Lattice Boltzmann Method
A Lattice Boltzmann method is applied to demonstrate the comparison results of simulating natural convection in an open end cavity using different hydrodynamic and thermal boundary conditions. The Prandtl number in the present simulation is 0.71, Rayleigh numbers are 104,105 and 106 and viscosities are selected 0.02 and 0.05. On-Grid bounce-back method with first-order accuracy and non-slip met...
متن کامل