Effects of Reflow Time on the Interfacial Microstructure and Shear Behavior of the SAC/FeNi-Cu Joint
نویسندگان
چکیده
Effects of reflow time on the interfacial microstructure and shear strength of the SAC/FeNi-Cu connections were investigated. It was found that the amount of Cu6Sn5 within the solder did not have a noticeable increase after a long time period of reflowing, indicating that the electro-deposited FeNi layer blocked the Cu atoms effectively into the solder area during a long period under liquid-conditions. The ball shear test results showed that the SAC/FeNi-Cu joint had a comparable strength to the SAC/Cu joint after reflowing, and the strength drop after reflowing for 210 s was less than that of the SAC/Cu joint.
منابع مشابه
Interfacial Reaction and Mechanical Characterization of Eutectic Sn--Zn/ENIG Solder Joints during Reflow and Aging
The interfacial reactions and joint reliabilities between Sn–9mass%Zn solder and an electroless nickel-immersion gold (ENIG) plated Cu substrate were investigated during reflow and isothermal aging at temperatures between 343 and 423K for aging times of up to 2400 h. After reflowing and aging, the intermetallic compound (IMC) formed at the interface was found to be AuZn3. No Ni-containing react...
متن کاملInvestigation of the Lead-free Solder Joint Shear Performance
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The purpose of this study is to investigate the effects of reflow profile and thermal shock on the shear performance of eutectic SnPb (SnPb) and Sn3.0Ag0.5Cu (SAC305) solder joints. Test boards were assembled with four different sized surface mount chip resisto...
متن کاملInvestigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer
In this study, joining of Ni3Al intermetallic compounds using the transient liquid phase (TLP) process with Cu interlayer was investigated. The binding process was carried out in a vacuum furnace at a temperature of 1050 °C for different times of 30, 60, 90 and 120 minutes. The effect of time variation on microstructure and mechanical properties of the joint zone was investigated. The EDS analy...
متن کاملEffect of Ni or Co Addition to Sn-Ag Solder on Microstructure and Joint Strength at Interface
Among various lead-free alloys, Sn-Ag(-Cu) system solders are considered the most promising lead-free solders for both wave and reflow soldering technology. Moreover, to improve the characteristics of lead-free solders, the effect of the addition of minor elements to lead-free solders on the properties of solder and interfacial reactions have been studied. The purpose of this research was to in...
متن کاملInterfacial Reaction and IMC Growth of an Ultrasonically Soldered Cu/SAC305/Cu Structure during Isothermal Aging
In order to accelerate the growth of interfacial intermetallic compound (IMC) layers in a soldering structure, Cu/SAC305/Cu was first ultrasonically spot soldered and then subjected to isothermal aging. Relatively short vibration times, i.e., 400 ms and 800 ms, were used for the ultrasonic soldering. The isothermal aging was conducted at 150 °C for 0, 120, 240, and 360 h. The evolution of micro...
متن کامل