Scanning Probe Microscope-Based Fluid Dispensing
نویسندگان
چکیده
Advances in micro and nano fabrication technologies have enabled fabrication of smaller and more sensitive devices for applications not only in solid-state physics but also in medicine and biology. The demand for devices that can precisely transport material, specifically fluids are continuously increasing. Therefore, integration of various technologies with numerous functionalities in one single device is important. Scanning probe microscope (SPM) is one such device that has evolved from atomic force microscope for imaging to a variety of microscopes by integrating different physical and chemical mechanisms. In this article, we review a particular class of SPM devices that are suited for fluid dispensing. We review their fabrication methods, fluid-pumping mechanisms, real-time monitoring of dispensing, physics of dispensing, and droplet characterization. Some of the examples where these probes have already been applied are also described. Finally, we conclude with an outlook and future scope for these devices where femtolitre or smaller volumes of liquid handling are needed.
منابع مشابه
Studying of various nanolithography methods by using Scanning Probe Microscope
The Scanning Probe Microscopes (SPMs) based lithographic techniques have been demonstrated as an extremely capable patterning tool. Manipulating surfaces, creating atomic assembly, fabricating chemical patterns, imaging topography and characterizing various mechanical properties of materials in nanometer regime are enabled by this technique. In this paper, a qualified overview of diverse lithog...
متن کاملAn approach to control of droplet size in nanoscale dispensing
Nanoscale dispensing (NADIS) has been recently developed for liquid deposition and manipulation. In NADIS, atomic force microscope probe milled by a focused ion beam was used for nanoscale dispensing of liquid. We present an approach to control the size of dispensed droplets by several parameters such as the aperture size on the probe, the surface energy of both tip outer wall and sample surfac...
متن کاملNanodispenser for attoliter volume deposition using atomic force microscopy probes modified by focused-ion-beam milling
In this letter, we describe the on-demand dispensing of single liquid droplets with volumes down to a few attoliters and submicrometric spacing. This dispensing is achieved using a standard atomic force microscope probe, with a 200 nm aperture at the tip apex, opened by focused ion beam milling. The inside of the tip is used as reservoir for the liquid. This maskless dispensing, realized in amb...
متن کاملStudying of various nanolithography methods by using Scanning Probe Microscope
The Scanning Probe Microscopes (SPMs) based lithographic techniques have been demonstrated as an extremely capable patterning tool. Manipulating surfaces, creating atomic assembly, fabricating chemical patterns, imaging topography and characterizing various mechanical properties of materials in nanometer regime are enabled by this technique. In this paper, a qualified overview of diverse lithog...
متن کاملScanning hall probe microscopy technique for investigation of magnetic properties
Scanning Hall Probe Microscopy (SHPM) is a scanning probe microscopy technique developed to observe and image magnetic fields locally. This method is based on application of the Hall Effect, supplied by a micro hall probe attached to the end of cantilever as a sensor. SHPM provides direct quantitative information on the magnetic state of a material and can also image magnetic induction under a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Micromachines
دوره 5 شماره
صفحات -
تاریخ انتشار 2014