Automated roboting deburring using electronic compliancy; Impedance control
نویسنده
چکیده
A new strategy has been developed for preclslon deburrlng and grinding to guarantee burr removal whlle compensating for robot oscillatrons and small uncertaintles in the location of the part relatlve to the robot. Thls problem has been posed as a frequency domaln control problem. Electronic cornpllancy (impedance control) Is demanded as an "adaptwe" mechsnlsm to satisfy the requlrements of this new strategy. Thls paper examlnes the development anc! lmplementatlon f impedance control methodolgy (7,8,9,10,161 on an active endeffector[151 (or the whole robot if it Is possible] for precision deburring and grinding tasks.
منابع مشابه
The Development of Co:mpliant Tool Holders for Robotic Deburring
This paper represents a practical and economical alternative to manual deburring. Several passive end-effectors have been designed, built and tested to meet the robotic deburring requirements. The compliancy in these end-effectors allow for robot position uncertainties relative to the parts. A set of experiments have been carried out to show the effectiveness of the end-effectors performance in...
متن کاملHybrid Impedance Control in Constraint Coordinates using a Disturbance Observer
Many contact tasks are more easily deened in terms of constraint equations (and therefore constraint coordinates), rather than either Cartesian or joint coordinates. Deburring and grinding are examples of two such tasks. Hybrid Impedance control has been a popular force control algorithm for these tasks. This paper gives a procedure to specify orthogonal subspaces in constraint coordinates. It ...
متن کاملImpedance Control of Flexible Robot Manipulators
Force control is very important for many practical manipulation tasks of robot manipulators, such as, assembly, grinding, deburring that associate with interaction between the end-effector of the robot and the environment. Force control of the robot manipulator can be break down into two categories: Position/Force Hybrid Control and Impedance Control. The former is focused on regulation of both...
متن کاملModeling and control of a new robotic deburring system
A machining manipulator is subject to mechanical interaction with the object being processed. The robot performs the task in constrained work space. In constrained tasks, one is concerned with not only the position of the robot end-point, but also the contact forces, which are desired to be accommodated rather than resisted. Therefore, interaction force needs to be considered in designing and c...
متن کاملApplication of an Intelligent Force Controller for Robotic Deburring Process
To achieve the desired dynamic impedance and the smooth chamfer contour, some adaptive controls and intelligent control schemes are incorporated in the impedance control for uncertain constrained robot systems. Most of them still result in an uneven chamfer for its characteristics in nature as the burrs vary highly. In this paper, an intelligent force controller based on impedance control with ...
متن کامل