Effect of Nozzle Shape on Dross Generation in Fine Cutting of
نویسندگان
چکیده
The nozzle shape was investigated in order to develop a high performance nozzle for pulsed Nd:YAG laser cutting, and its effect on fine cutting of thin metal plate was also discussed. In the case of 0.5mm throat diameter Laval throat nozzle with an initial expansion zone, the pressure on workpiece increased, and the straightness of gas flow was improved compared to a traditional straight throat nozzle, and the observation using high-speed video camera could reveal the behavior of removing molten metal downward. The experimental results proved that Laval throat nozzle with an initial expansion zone made it possible to reduce the dross height and the kerf width.
منابع مشابه
Favorable Plug Shape of an Aerospike Nozzle in Design, Over and Under Expansion Conditions
The influence of the plug shape on the performance of an aerospike nozzle thrust force is studied in different back pressure conditions. To generate smooth plug contours, Cubic B-Spline technique is employed. In the current research, basis functions are obtained using Deboor’s relation. The flow field around the aerospike nozzle is investigated implementing various shapes and the best of the ge...
متن کاملMean Velocity and Static Pressure in a Sharp-edge Circular Nozzle Jet
An axisymmetric jet issued from a sharp edged circular convergent nozzle has been studied experimentally in the near field at Reynolds number 5.3x104 to search the saddle shape behavior of mean velocity and the role of mean static pressure in the jet flow. Due to the vena contracta effect the centerline mean velocity of the jet increases about 4.2% of its exit value and corresponding decrease ...
متن کاملExperimental study of the diesel injector nozzle sediment effect on fuel spray behavior
High pressure amount of fuel in new generation diesel engines’ injector equipped with multiple and small nozzle holes has created significant improvement in the outgoing spray behavior and engine performance. On the other hand, poor fuel quality and injector nozzle embedded in high temperature combustion chamber form fundamental deposits on the nozzle leading to fuel spray inappropriate behavio...
متن کاملON OPTIMAL NOZZLE SHAPES OF GAS-DYNAMIC LASERS
Pontryagin's principle is used to study the shape of the supersonic part of the nozzle of a carbon dioxide gas-dynamic laser whose gain is maximal. The exact shape is obtained for the uncoupled approximation of Anderson's bimodal model. In this case, if sharp corners are allowed, the ceiling of the supersonic part consists of a slant rectangular sheet followed by a horizontal one; otherwise...
متن کاملUsing an experimental drilling simulator to study operational parameters in drilled-cutting transport efficiency
Inadequate hole cleaning can lead to many problems in horizontal and directional wells. In this work, we tried to investigate the cutting transport phenomenon by an experimental directional drilling simulator, considering the differences between the operational and experimental conditions. The inclination, fluid type (water, foam, viscous, and dense), rotary speed (0 and 110 rpm), nozzle bit si...
متن کامل