A full-stress, thermomechanical flow band model using the finite volume method
نویسندگان
چکیده
[1] A thermomechanical ice flow model is formulated using the finite volume method. Separate submodels solve the full, two-dimensional momentum equations, the advective-diffusive heat equation, and evolution of the free surface. A unique aspect of the method is the use of a boundary-fitted, orthogonal, curvilinear coordinate system, which simplifies the implementation of boundary conditions, leads to a straightforward discretization scheme, and results in banded sparse coefficient matrices that can be inverted directly. For simple boundary conditions and geometries, the model compares well with analytical solutions. For more complicated boundary conditions and geometries, the model compares well with full-stress solutions obtained by previous authors.
منابع مشابه
Effect of Elasticity Parameter on Viscoelastic Fluid in Pipe Flow Using Extended Pom-Pom Model
In this study prediction of the steady-state flow of branched polymer melts in pipe geometry with finite volume method is presented. Our analysis in this study revealed that;for normal-stress tqq , the XPP model can predict this tensor unlike the other viscoelastic models such as PTT or Gieskus which can not predict tqq...
متن کاملBlood Flow Simulation in an Aorta with a mild coarctation Using Magnetic Resonance Angiography and Finite Volume Method
Coarctation of the aorta is one of the five main congenital cardiovascular failures, accounting for 6–8 percent of these failures. This research aimed to simulate the blood flow of a seventeen-year-old male teen with a mild coarctation at one-third of his aorta's descending branch. The simulation was performed by extracting the domain and the input pulsatile velocity signal as the boundary cond...
متن کاملApplying a full implicit finite-difference method in jet impingement heat transfer studies
Jet impingement heat transfer is an effective and practical approach that is employed in many industrial processes where heating, cooling, or drying is required. Details of the heat or mass transfer rate have been investigated both experimentally and numerically and can be found in the published literature. In most of the numerical studies, control-volume approach has been employed to solve the...
متن کاملFlow Stress Modeling in a γ-γ/ Cobalt Base Superalloy by Using the Hyperbolic Sine Equation and ANN Method
The new class of wrought γ-γ/ Co-base superalloys, which are based on Co-Al-W system, was developed by conventional hot working routes with a high volume fraction of γ/ precipitates and good mechanical properties. The aim of the present study was to predict the flow stress and hot deformation modeling of a novel γ-γ/ Co-base superalloy. The hot compression test...
متن کاملFinite Volume Solution of a Cylinder in Cross Flow with Heat Transfer
A finite-volume model has been developed to study incompressible forced flow heat transfer of air over a circular cylinder in cross flow. An artificial compressibility technique is applied to couple the continuity to the momentum equations. The proposed explicit finite-volume method (FVM) uses a novel discretization in time and space. The governing equations are solved by time-marching using a ...
متن کامل