The Effect of Intra-Pulse RF Variation on Bunch Train Energy Spread
نویسندگان
چکیده
A brief analysis is presented of the effect of small variations in amplitude and phase in the accelerating rf pulse in addition to the deliberate pulse shaping on the energy deviation along a bunch train and the effects of pulse-to-pulse fluctuations.
منابع مشابه
Simulation and Compensation of Multibunch Energy Variation in NLC*
The SLAC NLC design for a next-generation linear collider utilizes multibunching (acceleration of a train of bunches on each RF fill) to increase the luminosity and energy efficiency. It is necessary to control the energy spread of the beam, in order to minimize chromatic emittance dilution and be within the energy acceptance of the final focus. It is anticipated that the NLC may run with bunch...
متن کاملReducing Energy Spread for Long Bunch Train at SLAC
The normal energy gain of the SLC RF system, using SLED (SLAC Energy Development) cavities, can accelerate only about 150 ns beam pulse within an energy spread of 0.5 % with 1011 particles per pulse. By applying two additional 180o phase inversions for about 20 % of all SLC klystrons, the classical SLED pulse is flattened to achieve an energy spread of 0.5 % over 240 ns which corresponds to 680...
متن کاملFemtosecond Photocathode Electron Gun for Time- Resolved Electron Diffraction
Ultrafast time-resolved electron diffraction based on a photocathode rf electron gun is being developed in Osaka University to reveal the hidden dynamics of intricate molecular and atomic processes in materials. The photocathode rf gun generates a femtosecond-bunch electron beam by femtosecond laser driving. The transverse emittance, bunch length and energy spread were measured. The growths of ...
متن کاملConceptual Design of the Clic Damping Ring Rf System
In order to achieve high luminosity in CLIC, ultra-low emittance bunches have to be generated in both electron and positron damping rings. To achieve this goal, big energy loss per turn in the wigglers has to be compensated by the RF system. This results in very strong beam loading transients affecting the longitudinal bunch position and bunch length. In this paper, the conceptual design of the...
متن کاملBeam Loading Compensation in the Nlcta*
In the design of the Next Linear Collider (NLC), multibunch operation is employed to improve efficiency at the cost of substantial beam loading. The RF pulse that powers the accelerator structures will be shaped to compensate for the effect of the transient loading along the bunch train. This scheme has been implemented in the Next Linear Collider Test Accelerator (NLCTA), a facility built to t...
متن کامل