Two Approaches for a Servomechanism Control System Using Computer Vision
نویسندگان
چکیده
In this paper a servomechanism vision control system, based on hand language, is presented. The control images are acquired by a generic webcam and processed, in the working phase, in quasi real time. For this processing, two approaches were considered: in the first one, we used the object control moments to identify the desired order; in the second approach, we used image control orientation histograms. In both approaches, the preset orders images to be considered are acquired in the learning phase. The used servomechanism and the two approaches used for the vision control system are described and some advantages and weakness of each one are indicated. An example of an images control order set, which works satisfactory, is also presented and some conclusions and future work are also addressed.
منابع مشابه
Design and Implementation of a Control System for a DC Servomechanism with an Internal Dither Created by a Limit Cycle
Purpose of this paper is designing of a positional angle control system for a DC servomechanism. The servomechanism system consists of a direct current (DC) motor, a motor driver, a measuring sensor, and a control board to adjust angular position. The motor in the servomechanism has a non-linear element called dead-zone. Presence of dead-zone causes the nonlinear behavior of system. Injecting a...
متن کاملControl a 2-Axis Servomechanism by Gesture Recognition using a Generic WebCam
This paper presents two approaches used to control a 2-axis servomechanism by gesture recognition. For both approaches, the adopted control philosophy was: In the system’s learning phase, the control images are acquired by a generic webcam and associated to the desired orders. On the other hand, in the working phase, each control image is acquired, by the same webcam and, by comparison with the...
متن کاملVisual Torch Position Control Using Fuzzy-Servoing Controller for Arc Welding Process
In this paper, we propose a fuzzy-servoing controller method for automatic welding. The proposed method uses a vision based arc tracking to find the initial points of the weld seam and to track them without a prior knowledge. Due to a serious melt down in the weld pool during the welding process, the method requires to control the welding torch in two directions, up-down and left-right directio...
متن کاملDesign and Implementation of Discrete Time Observer Based Backstepping Controller for a 2DOF Servomechanism
The two degrees of freedom servomechanism has many applications, including in gimbaled seekers. These mechanisms require closed-loop control to perform properly. In this paper, an observer-based multi-input-multi-output hybrid controller is designed for a two-degree-of-freedom servomechanism. Since in the model presented in this paper, disturbances on the mechanism are considered, so an extende...
متن کاملLabVIEW implementation of an enhanced nonlinear PID controller based on harmony search for one-stage servomechanism system
This paper presents a practical implementation for a new formula of nonlinear PID (NPID) control. The purpose of the controller is to accurately trace a preselected position reference of one stage servomechanism system. The possibility of developing a transfer function model for experimental setup is elusive because of the lack of system data. So, the identified model has been developed via gat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004