Mathematical modeling of longitudinal dynamic pressure distribution on planing hulls
نویسندگان
چکیده
In the present paper, a mathematical model is used in order to predict the longitudinal distribution of dynamic pressure on planing hulls. The present model is based on the empirical equations resulted from multitude of experiments that have been carried out over the years on planing boats. These empirical equations are able to predict a longitudinal section of the pressure distribution. The obtained pressure field is then used to evaluate the dynamic pressure behind the stagnation line. A computer code is developed for the modeling purposes and the obtained results are validated against experimental data. In this regard, the effects of the trim angle, dead-rise angle and the wetted length on the longitudinal distribution of the dynamic pressure for the planing hulls are studied.
منابع مشابه
A Mathematical Scheme for Calculation of Lift of Planing Crafts with Large Mean Wetted Length and a Comparative Study of the Effective Parameters
By the current paper, lift force that is an important characteristic of a planing hull is calculated. To accomplish this task, Morabito’s mathematical model that has been previously derived for prediction of total pressure distribution on planing hulls is utilized. These equations are not restricted to any specific mean wetted length and can be used for planing hulls with large value of mean we...
متن کاملIntroducing a Particular Mathematicalmodel for Predicting the Resistance and Performance of Prismatic Planing Hulls in Calm Water by Means of Total Pressure Distribution
Abstract: Mathematical modeling of planing hulls and determination of their characteristics are the most important subjects in hydrodynamic study of planing vessels. In this paper, a new mathematical model has been developed based on pressure distribution. This model has been provided for two different situations: (1) for a situation in which all forces pass through the center of gravity and (2...
متن کاملEffects of Loading Conditions on Hydrodynamics of a Hard-Chine Planing Vessel Using CFD and a Dynamic Model
Planing vessels usually have low ratios of resistance to weight, so they can move fast on sea surface than the displacement or semi-displacement ships. Access to higher speeds is one of the attractions for designers and users. To achieve higher speeds, reducing the hydrodynamic resistance is a necessity for this class of vessels. In this study, a 3D finite volume approach is used to analyze the...
متن کاملNumerical Modeling of the Stepped Planing Hull in Calm Water
This article describes a 3D CFD (computational fluid dynamics) simulation implementation of the stepped planning hull in calm water. The turbulent free surface flow around the stepped planing hull is computed with a RANSE method, using the solver ANSYS-CFX. The turbulence model used is standard k–ε. In order to simulate the disturbed free surface, VOF model is implemented. The CFD model has bee...
متن کاملNumerical Hydrodynamic Performance of the Stepped Planing Craft and Its Step Height Effect (RESEARCH NOTE)
One of the most efficient methods of reducing drag on planing craft is the use of transverse step on the bottom of a hull. Applying steps on the hull reduces the contact area with water and as a result, it reduces drag of the craft. Planing craft are able to have one or two transverse steps. In this paper, numerical hydrodynamic performance of the stepped planing craft and its step height effec...
متن کامل