Development of CAD/CAM System for Cross Section’s Changing Hole Electrical Discharge Machining -Formulation of Post Processor-
نویسندگان
چکیده
This study deals with the development of a new CAD/CAM system for fabricating the holes whose cross sections are changing variously. A cross section of a machined hole is generally constant. To solve the problem, a new device had developed which could create cross section’s changing holes by means of electrical discharge machining. However, it was impossible to put the device into practical use, since the software to machine complicated shape did not exist. Accordingly, the study aims at development of the new CAD/ CAM system for the machining using the device. As a first step, in this paper, the post processor of the CAD/CAM system is formulated.
منابع مشابه
Intelligent Knowledge Based System Approach for Optimization of Design and Manufacturing Process for Wire-Electrical Discharge Machining
Wire electrical discharge machining (WEDM) is a method to cut conductive materials with a thin electrode that follows a programmed path. The electrode is a thin wire. Typical diameters range from .004" - .012" (.10mm - .30mm) although smaller and larger diameters are available. WEDM is a thermal machining process capable of accurately machining parts with varying hardness or complex shapes. WED...
متن کاملIntelligent Knowledge Based System Approach for Optimization of Design and Manufacturing Process for Wire-Electrical Discharge Machining
Wire electrical discharge machining (WEDM) is a method to cut conductive materials with a thin electrode that follows a programmed path. The electrode is a thin wire. Typical diameters range from .004" - .012" (.10mm - .30mm) although smaller and larger diameters are available. WEDM is a thermal machining process capable of accurately machining parts with varying hardness or complex shapes. WED...
متن کاملMulti-objective optimization and analysis of electrical discharge machining process during micro-hole machining of D3 die steel employing salt mixed de-ionized water dielectric
Correct selection of manufacturing condition is one of the most important aspects which should be considered in the majority of manufacturing processes, particularly in the process related to advanced machining process like electrical discharge machining. In electrical discharge machining (EDM), dielectric fluid plays an important role since machining characteristics are greatly influenced by ...
متن کاملComputer Application in Post Processor Development of an Indigenous CAD/CAM Package
CollabCAD is an indigenous 3D CAD/CAM software system for collaborative design and development of Industrial Designs for strategic use. This work is for CAM module of the indigenous software, in which the development of post-processor is the task that is accomplished. The CAD model is created in CollabCAD and the required tool path was produced in a generic format known as Cutter Location (CL) ...
متن کاملCAD/CAM software for an industrial laser manufacturing tool
A facility for rapid prototyping of MEMS devices is crucial for the development of novel miniaturised components in all sectors of high-tech industry, e.g. telecommunications, information technology, micro-optics and aerospace. To overcome the disadvantages of existing techniques in terms of cost and flexibility, a new approach has been taken to provide a tool for rapid prototyping and small-sc...
متن کامل