Whole-Arm Impedance of a Serial-Chain Manipulator
نویسنده
چکیده
In this paper, we propose a mechanical impedance for the whole arm of a serial-chain manipulator. The proposed impedance has a geometrically natural property owing to use of a spatial curve which describes a virtual reference of the impedance. The proposed impedance is useful for geometric task planning in whole-arm manipulation. Illustrative examples are shown for understanding of the impedance.
منابع مشابه
Virtual Compliance Control of a Kinematically Redundant Serial Manipulator with 9 DoF
Kinematically redundant serial manipulators are currently used in industry either to avoid singular configurations or to increase dexterity. However, the surplus degrees of freedom of such mechanisms can also be used to ensure, or at least increase safety in a human-robot collaborative scenario. In this work the behavior of a serial manipulator with nine rotary joints is described where one joi...
متن کاملDesign Characteristics and Dynamic Modeling of a Cooperative Dual-Arm- Lock Manipulator
Recent developments in the area of smart structures indicate that variable geometry / stiffness truss network is of fundamental importance in designing smart transformable structures and systems for space applications. This paper presents the conceptual design and dynamic modeling of a cooperative re-configurabel dual-arm robotic structure called Dual-Arm Cam-Lock Manipulator. The Manipulator i...
متن کاملMathematical Modeling of a Compounded Serial- Parallel Mobile Robot
S. Ali A. Moosavian and A. Pourreza 2 Advanced Robotics & Automated Systems (ARAS) Laboratory Department of Mechanical Engineering, K. N. Toosi Univ. of Technology Tehran, Iran, P.O. Box 19395-1999, Fax: (+98) 21 8867-4748 Corresponding Author E-mail: [email protected] Abstract In this study, kinematics and dynamics of a compounded serial-parallel wheeled mobile robot is elaborated. The newl...
متن کاملStiffness control of a legged robot equipped with a serial manipulator in stance phase
The ability to perform different tasks by a serial manipulator mounted on legged robots, increases the capabilities of the robot. The position/force control problem of such a robot in the stance phase with point contacts on the ground is investigated here. A target plane with known stiffness is specified in the workspace. Active joints of the legs and serial manipulator are used to exert the de...
متن کاملOn the Manipulability of Velocity-constrained Serial Robotic Manipulators
Abstract: This paper presents a performance metric for the manipulability of constrained serial manipulators. The manipulability measure and manipulability ellipsoid are found from the manipulability Jacobian, which is easily found for serial manipulators as the standard Jacobian matrix, or for parallel manipulators as the Jacobian that gives the mapping from the active joint velocities to the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001