Isolation and characterization of muscle membranes using surface-specific labels.
نویسندگان
چکیده
Membranes were purified from rat muscle by a differential centrifugation method that avoids the use of salt extraction or incubations at elevated temperature. Three populations of membrane-limited vesicles were defined having average densities of 1.112 (fraction I), 1.141 (fraction II), and 1.158 (fraction III) g/ml in a continuous sucrose gradient. Lactoperoxidase-catalyzed iodination of intact muscle prior to isolation of membranes resulted in highest specific activity in fraction I, although all fractions could be equally labeled after isolation. 125I-Labeled wheat germ agglutinin incubated at low concentration with intact muscle preferentially labeled fraction I. Parallel studies on previously isolated fractions indicated that fraction I also contained the highest concentration of potential receptors for wheat germ agglutinin. In experiments on whole muscle, concanavalin A bound predominantly to sarcolemma with slight variable binding to T-tubular and nuclear membrane but no binding to sarcoplasmic reticulum or mitochondria. Parallel binding studies with isolated membrane fragments indicated heavy binding of concanavalin A by membranes in fraction I with scattered binding in fractions II and III. Na+K+Mg2+ ATPase was specifically enriched in fraction I but was also present in fraction II in a proportion similar to 125I labeling. Ca2+ ATPase was most active in fraction II but present in significant levels in fraction I. It is concluded from these and other data that fraction I contains predominantly sarcolemma membrane, while T-tubular membrane may represent a significant component of fraction II. Ca2+ ATPase activity in fraction I is intrinsic to the sarcolemma.
منابع مشابه
Performance of Chemically Modified TiO2-poly (vinylidene fluoride) DCMD for Nutrient Isolation and Its Antifouling Properties
The surface properties of TiO2-PVDF nanocomposite membranes were investigated by incorporating different chemically modified TiO2 nanoparticles into the poly (vinylidene fluoride) (PVDF) matrix. The nanocomposite membranes were prepared via dual coagulation bath diffusion and the induced phase inversion method. The membrane surface morphologies were investigated by using SEM and AFM and related...
متن کاملPreparation and characterization of nano-porous Polyacrylonitrile (PAN) membranes with hydrophilic surface
Polyacrylonitrile (PAN) membranes with nano-porous surface and high hydrophilicity were fabricated by addition of polyoxyethylene (40) nonylphenyl ether (IGEPAL) as an additive in the casting solution. The membranes were prepared from PAN/IGEPAL/1-Methyl-2-pyrrolidone (NMP) via phase inversion induced by immersion precipitation technique. Pure water was used as coagulation medium. The effects o...
متن کاملCharacterization of Commercial Ceramic and Hybrid Membranes Using Gas Permeation and Permporometry Tests
The gas separation performance of commercial ceramic Titania and hybrid silica (HybSi®) membranes was assessed using the gas permeation and permporometry methods. Results indicated that the HybSi® membranes have a hybrid surface containing regions covered by a polymeric matrix and others with inorganic pores. These membranes have high H2 selectivity, which incre...
متن کاملPreparation and characterization of nano-porous Polyacrylonitrile (PAN) membranes with hydrophilic surface
Polyacrylonitrile (PAN) membranes with nano-porous surface and high hydrophilicity were fabricated by addition of polyoxyethylene (40) nonylphenyl ether (IGEPAL) as an additive in the casting solution. The membranes were prepared from PAN/IGEPAL/1-Methyl-2-pyrrolidone (NMP) via phase inversion induced by immersion precipitation technique. Pure water was used as coagulation medium. The effects o...
متن کاملFabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE)
This study is focused on fabrication and characterization of mixed matrix poly ether sulfone based nanofiltration membrane by phase inversion method. The effect of different amounts of Ilmenite (FeTiO3) particles as inorganic filler additive in the casting solution on physic-chemical characteristics of membranes was studied. Scanning electron microscopy, surface analysis, water content, contact...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Proceedings of the National Academy of Sciences of the United States of America
دوره 74 1 شماره
صفحات -
تاریخ انتشار 1977