Chlorine Dioxide Treatment of Sisal Fibre: Surface Lignin and Its Influences on Fibre Surface Characteristics and Interfacial Behaviour of Sisal Fibre/phenolic Resin Composites
نویسندگان
چکیده
This paper describes an investigation of the influences of chlorine dioxide treatment on fibre surface lignin. The fibre surface characteristics and the interfacial behaviour of the sisal fibre/phenolic resin composites were also studied by SEM, AFM, and XPS. The results show that the surface of the untreated fibre contains a large amount of lignin with granular structure and non-granular structure. The surface lignin concentration is up to 51% for the untreated fibre, and then it decreases to 24% and 20% for fibres treated with 1.5 % and 2.0% chlorine dioxide, respectively. The removal of lignin from the fibre surface can enhance the interfacial strength of the composites, giving rise to increases by 36% and 28% in tensile strength and internal bonding strength. These results indicate that the surface properties of single sisal fibres can be tailored to improve the fibre/resin interface. Chlorine dioxide treatment has potential for surface modification of sisal fibre in engineering the interfacial behaviour of composites.
منابع مشابه
Mechanical Behaviour of Sisal Fibre Reinforced Cement Composites
Emphasis on the advancement of new materials and technology has been there for the past few decades. The global development towards using cheap and durable materials from renewable resources contributes to sustainable development. An experimental investigation of mechanical behaviour of sisal fibrereinforced concrete is reported for making a suitable building material in terms of reinforcement....
متن کاملDegradation analysis of lignocellulosic fillers infused coir epoxy composites in different environmental conditions
India has large resources of natural fibres such as Banana, Khus, Sisal, Korai grass,Talipot, Palm leaf, Coconut, Pineapple, Screwpine, Golden grass, Jute and Sabaiamong others. In the past, trade of the village folk depended on harvesting fibresgrown in their villages. Natural fibers have recently gaining attraction of researchersdue to their low cost eco-friendly and biodegradability characte...
متن کاملMechanical Properties of Short Banana/Sisal Hybrid Fibre Reinforced Polyester Composites
Short randomly oriented banana and sisal hybrid fibre reinforced polyester composites, banana/polyester composites and sisal/polyester composites were fabricated at different fibre loading say, 0.20 to 0.50 Vf. Composites were prepared by varying the relative volume fraction of the two fibres at each fibre loading. When the fibre loading was increased; tensile, flexural and impact properties in...
متن کاملEvaluation of the Influence of Chemical Treatment on the Tensile Strength of Sisal Fibresby a Weibull Distribution Analysis
Mercerisation is a common chemical treatment for sisal fibres since it can be used to increase their interfacial adhesion to various polymeric matrices. The influence of this treatment on fibre tensile strength from the point of view of a Weibull distribution is reported. A hundred non-treated sisal fibres were individually tested and the accordance of their tensile strength to a Weibull distri...
متن کاملMechanical Testing of Hybrid Composite Material (Sisal and Coir)
The global demand for wood as a building material is steadily growing, while the availability of this natural resource is diminishing. This situation has led to the development of alternative materials. Of the various synthetic materials that have been explored and advocated, polymer composites claim a major participation as building materials. There has been a growing interest in utilizing nat...
متن کامل