Low-Loss CPW on Low-Resistivity Si Substrates with a Micromachined Polyimide Interface Layer for RFIC Interconnects

The measured and calculated propagation constant of coplanar waveguide (CPW) on low-resistivity silicon (1 cm) with a micromachined polyimide interface layer is presented in this paper. With this new structure, the attenuation (decibels per centimeter) of narrow CPW lines on low-resistivity silicon is comparable to the attenuation of narrow CPW lines on high-resistivity silicon. To achieve these results, a 20m-thick polyimide interface layer is used between the CPW and the Si substrate with the polyimide etched from the CPW slots. Only a single thin-film metal layer is used in this paper, but the technology supports multiple thick metal layers that will further lower the attenuation. These new micromachined CPW lines have a measured effective permittivity of 1.3. Design rules are presented from measured characteristics and finite-element method analysis to estimate the required polyimide thickness for a given CPW geometry.