Analysis of Electromigration in Dual-Damascene Interconnect Structures

نویسندگان

  • R. L. de Orio
  • S. Carniello
  • H. Ceric
  • S. Selberherr
چکیده

We have analyzed the stress build-up and vacancy dynamics due to material transport caused by electromigration in dual-damascene interconnect structures. Our model incorporates all relevant driving forces for material transport with a complete integration of mechanical stress in connection with microstructural aspects. First, it is shown that the addition of redundant vias can be effective in increasing the interconnect lifetime, although the spacing between the vias can have a significant impact on such an approach. Then, we discuss the importance of grain boundaries in providing triple point intersections, where the combination of high vacancy concentration and high stress is likely to cause void nucleation.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electromigration failure in a copper dual-damascene structure with a through silicon via

Electromigration induced failure development in a copper dual-damascene structure with a through silicon via (TSV) located at the cathode end of the line is studied. The resistance change caused by void growth under the TSV and the interconnect lifetime estimation are modeled based on analytical expressions and also investigated with the help of numerical simulations of fully three-dimensional ...

متن کامل

Stress-Induced Anisotropy of Electromigration in Copper Interconnects

Abstract. Modern interconnect structures are exposed to high mechanical stresses during their operation. These stresses have their sources in interconnect process technology and electromigration. The mechanical properties of passivating films and the choice of process technology influence electromigration reliability. In this paper we analyze the interplay between electromigration and mechanica...

متن کامل

Effect of strains on anisotropic material transport in copper interconnect structures under electromigration stress

We analyzed the effect of strains on material transport in a typical dual damascene copper interconnect via under electromigration stress. The electromigration model incorporates all important driving forces for atom migration coupled with the solution of the electrical and thermal problems. Our approach differs from others by considering a diffusivity tensor in the transport equation taking in...

متن کامل

Application of the Copper Damascene Process for the Preparation of Electromigration Test Structures

The damascene technology is widely used for Cu interconnect structures in integrated circuits. Due to the strong variation of the feature sizes and densities of Cu interconnect lines and contact pads involved in electromigration (EM) test structures, the CMP of the excessive Cu layer is very complicated. This paper will present the challenges of removing of Cu and Ta by CMP and the successful a...

متن کامل

Effects of width scaling and layout variation on dual damascene copper interconnect electromigration

Electromigration versus line width in the 0.12–10 lm range and the configuration of the via/line contact in dual damascene Cu has been investigated. There are two scenarios for width scaling impact on electromigration. One is the width < 1 lm region, in which the MTF shows a weak width dependence, except for the via-limited condition. The other is the width > 1 lm region, in which the MTF shows...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009