Effect of Cervical Relining of Acrylic Resin Copings on the Accuracy of Stone Dies Obtained Using a Polyether Impression Material
نویسندگان
چکیده
The purpose of this study was to evaluate the accuracy of the respective dies after polyether elastomeric procedure in the presence or absence of cervical contact of the acrylic resin shell with the cervical region, establishing a comparison to dies obtained with stock trays. This study consisted of three groups with 10 specimens each: 1) acrylic copings without cervical contact, (cn); 2) acrylic copings with cervical contact (cc); 3) perforated stock tray, (st). The accuracy of the resulting dies was verified with the aid of a master crown, precisely fit to the master steel die. ANOVA test found statistically significant differences among groups (p<0.001). Tukey's test found that the smallest discrepancy occurred in group cn, followed by cc, while the st group presented the highest difference (cc x cn: p=0.007; st x cn: p<0.001; st x cc: p<0.001).
منابع مشابه
Accuracy of implant impression splinted techniques: effect of splinting material.
Three implant impression techniques, using 3 different splinting materials, were assessed for accuracy in a laboratory model that simulated clinical practice. For group A, an autopolymerizing acrylic resin was used to splint transfer copings. In group B, a dual-cure acrylic resin was used, and for group C, plaster, which was also the impression material, was used. A metal implant master cast wi...
متن کاملComparison of implant cast accuracy of multiple implant impression technique with different splinting materials: An in vitro study
INTRODUCTION An accurate and passive fit of implant framework prosthesis, as well as the successful surgical operation is suggested as one of the critical requirements for long-term implant success. OBJECTIVE The purpose of this in vitro study was to evaluate the accuracy of the master cast using open tray impression technique with conventional and novel splinting materials. METHODOLOGY A m...
متن کاملAccuracy of implant impressions with different impression coping types and shapes.
BACKGROUND Accurate recording of implant location is required so that definitive restorations are properly supported and do not place additional stresses on the implants. Movement of impression copings inside the impression material using an open-tray or close-tray impression technique during clinical and laboratory phases may cause inaccuracy in transferring the three-dimensional spatial orien...
متن کاملA Metal-Acrylic Bar for Splinting Implant Impression Copings
Precise transfer of three-dimensional position of dental implants from oral cavity to the cast needs special considerations in impression making. It has been suggested to splint the copings by bars or acrylic resin material before making impression. Some problems regarding to polymerization shrinkage of acrylic resin have been reported. In this study, we describe a metalacrylic bar tha...
متن کاملComparing the Accuracy of Three Different Impression Materials in Making Duplicate Dies
BACKGROUND Marginal adaptation is very important in cast restorations. Maladaptation leads to plaque retention, reduction of mechanical and esthetic properties. The aim of this study was to evaluate the precision of three different impression materials (including: Additional silicone [AS] and condensational silicone [CS] and polyether [PE]) for duplicating master dies. MATERIALS AND METHODS T...
متن کامل