An Investigation of the Effect of Heat Treatment on Surface Roughness in Machining by Using Statistical Analysis
نویسندگان
چکیده
Abstract– In the present paper, the effect of heat treatment on the surface roughness of AISI 4140 steel has been investigated by use of paired t-test and one way analysis of variance (ANOVA). The paired t-test was performed to determine the differences between the means before and after heat treatment. One way ANOVA was used to further evaluate the effect of heat treatment on the difference in variances between two groups. According to the statistical analysis, it was concluded that heat treatment has decreased the surface roughness at the 95% confidence level. The improvement of surface roughness varies from 37% to 45% with various combinations of experimental parameters.
منابع مشابه
Experimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel
The electro discharge machining (EDM), one of the methods used in the machining industry and a non-traditional manufacturing method, the electro erosion process does not depend on the hardness of material and offers a way to process materials of very complex geometry with very fine and high precision by using cheap electrode materials, which make it a preferred method. In this study, effect of ...
متن کاملExperimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel
The electro discharge machining (EDM), one of the methods used in the machining industry and a non-traditional manufacturing method, the electro erosion process does not depend on the hardness of material and offers a way to process materials of very complex geometry with very fine and high precision by using cheap electrode materials, which make it a preferred method. In this study, effect of ...
متن کاملApplication of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts
Face milling is an important and common machining operation because of its versatility and capability to produce various surfaces. Face milling is a machining process of removing material by the relative motion between a work piece and rotating cutter with multiple cutting edges. It is an interrupted cutting operation in which the teeth of the milling cutter enter and exit the work piece during...
متن کاملMicro Machining of AISI 440C Stainless Steel using Magnetic Field and Magnetic Abrasive Particles
Magnetic abrasive finishing (MAF) is a micromachining process that uses magnetic field and magnetic abrasive particles to conduct the mechanism of material removal in micro-nanometer scales. In this paper, by an experimental method and statistical analysis, the effects of parameters like working gap, work-piece rotational speed and material removal mechanism (injection of abrasive slurry of Al<...
متن کاملMicro Machining of AISI 440C Stainless Steel using Magnetic Field and Magnetic Abrasive Particles
Magnetic abrasive finishing (MAF) is a micromachining process that uses magnetic field and magnetic abrasive particles to conduct the mechanism of material removal in micro-nanometer scales. In this paper, by an experimental method and statistical analysis, the effects of parameters like working gap, work-piece rotational speed and material removal mechanism (injection of abrasive slurry of Al<...
متن کامل