Gigabit Laser Ethernet Transceiver for Free-Space Optical Communication Systems
نویسندگان
چکیده
This paper presents a novel FPGA-based Gigabit Laser Ethernet Transceiver featuring a custom designed transmission protocol capable of overcoming the inherent impairments of FSO communications. The prototype is characterized and validated with a ground to ground test. OCIS codes: (060.2605) Free-space optical communications; (060.4259) Networks, packet-switched.
منابع مشابه
The importance of modal bandwidth in Gigabit Ethernet systems
W ith the advent of Gigabit Ethernet Systems utilizing multimode fiber, the limiting factor in the fiber backbone is no longer the attenuation of the passive link, but rather, the bandwidth of the fiber. Due to different signal characteristics of the transmitter, new test procedures and a new understanding of the interaction between the optical fiber and the optical signal are required. Gigabit...
متن کاملDevelopment of Electro-Absorption Modulator Driver ICs for 25G/40G Transmission
As Internet traffic increases, large communication capacity is required in optical communication systems. For the client side of DWDM *1 (dense wavelength division multiplexing) systems, the baud rate of current optical communication is mainly 10 Gbit/s, which has already been used in 10G Ethernet. However, these systems will be insufficient for the accelerated traffic increase expected in the ...
متن کاملThe First Millimeter-wave Point-to-Point Wireless Gigabit Ethernet Communication System at TMR&D
In this paper, a millimeter-wave pointto-point (PTP) Wireless Gigabit Ethernet Communication System is presented and the first been developed by TMR&D. A 60 GHz Low Temperature Co-Fired Ceramics (LTCC) SystemOn-Package (SoP) Transceiver capable of gigabit data rate has been built and demonstrated with a size of 17.76 x 17.89 mm. A direct Amplitude-Shift Keying (ASK) modulation and demodulation ...
متن کاملFabrication of a low-cost module for Gigabit Ethernet transceivers
In this paper, a novel way for the fabrication of opto-electronic transceiver modules is proposed. These modules are characterized by the use of MT-RJ connectors, low-cost fabrication tools, highly efficient opto-electronic components such as VCSELs and CMOS integrated detectors, and an easy fabrication scheme. The module is based on the direct alignment technique; this means that the fibre and...
متن کامل10 Gigabit Ethernet Switch Blade for Large-Scale Blade Servers
The introduction of blade servers for diverse applications is expanding rapidly. The switch blade—a key network component of the blade server—must provide high performance to accommodate growing data-communication demands generated by network consolidation as in Fibre Channel over Ethernet (FCoE), have a compact, low-power-consumption design, and have switch control software optimized for blade...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013