Study of Polyacrylic Acid Adsorption on the Interface of Hydroxyapatite – Electrolyte Solutions

The adsorption of polyacrylic acid (PAA) on hydroxyapatite (HAP) from HAP saturated solutions was studied in this work as a function of PAA concentration, temperature, pH and ionic strength. In all experiments, the adsorption was studied under conditions of negatively charged adsorbent and adsorbate, respectively. These conditions ensured that adsorption was not electrostatically favored. The solution composition was found to influence significantly the maximum of the adsorbed amount. In fact, the adsorption of PAA, was found to increase with ionic strength, due to the decrease of double layer thickness of HAP particles. The effect of temperature and ionic strength on the kinetics of adsorption are also reported. Adsorption isotherms obtained at 30C were found to be Langmuirtype, while at higher temperatures they were of the Brunauer-Emmett-Teller (BET) type. The absorbed amount of PAA was found to decrease with temperature, while it increased with ionic strength. For pH values lower than 6.5, the adsorption increased while for pH between 6.5 and 9 the adsorbed amount remained almost constant.