Effect of Chemical Additive on Fixed Abrasive Polishing of LBO Crystal with Non-water Based Slurry
نویسندگان
چکیده
Non-water based fixed abrasive polishing was adopted to manufacture LBO crystal for nano precision surface quality because of its deliquescent. Ethyl alcohol was selected as the non-water based slurry solvent and ethanediamine, lactic acid, hydrogen peroxide was added in the slurry as a chemical additive, respectively. Effect of different additives with non-water based slurry on material removal rate, surface topography, microscopic appearances, and surface roughness were investigated in fixed abrasive polishing of LBO crystal. The results show the best surface quality of LBO crystal with surface roughness Sa 8.2 nm and small damages was obtained by non-water based slurry with lactic acid. Non-water based fixed abrasive polishing can achieve nano precision surface quality of LBO crystal with high material removal. Keywords—Non-water based slurry, LBO crystal, Fixed abrasive polishing, Surface roughness.
منابع مشابه
Customer Application Brief Electronics Chemical Mechanical Planarization (CMP) Slurry Manufacturing
Introduction The Chemical Mechanical Planarization (CMP) process plays a key role in the manufacture of data storage, video display panels, and semiconductor chips. The process combines the chemical (acidic or basic) effect of the slurry, which contains micro-abrasives with the mechanical effect provided by polishing to reduce the topography on the wafer or rigid disk substrate. The process for...
متن کاملA Modeling Approach for Predicting the Abrasive Particle Motion During Chemical Mechanical Polishing
Chemical mechanical polishing (CMP) is a manufacturing process in which a wafer surface is polished by pressing it against a rotating pad that is flooded with slurry. The slurry itself is a fluid containing abrasive particles. Past experimentation has shown that the distribution of suspended particles in the slurry is significantly related to the distribution of material removal on the wafer du...
متن کاملA Novel CMP Process on Fixed Abrasive Pads for the Manufacturing of Highly Planar Thick Film SOI Substrates
A new approach using Fixed Abrasive (FA) pads has been undertaken to overcome the problem of non-uniform thick film Silicon-on-Insulator (SOI) wafers after CMP polishing. The theoretical models indicating the advantages of the 2-body system of the fixed abrasive configuration vs. the conventional 3-body system of slurry based polishing have been convincingly demonstrated in practise upon experi...
متن کاملPreparation and Polishing Properties of Spherical Porous Silica Abrasive
Problem statement: Abrasive is one of key influencing factors on the polished surface quality in Chemical Mechanical Polishing (CMP). Solid abrasives in CMP slurries are easy to cause polishing scratches. It is well known that reducing the hardness of abrasives would improve the polished surface quality. Therefore, the change in structure or shape of the abrasives means a change in polished sur...
متن کاملDevelopment of a Lapping Film Utilizing Agglomerative Fine Abrasives for Finishing of Optical Glass
In the finishing process of optical glass, polishing with ceria, silica or zirconia slurry is conventionally adopted. The machining process, however, has problems involving inefficiency and a detrimental impact on the environment. Therefore, it is strongly recommended that the process be replaced with fixed-abrasive machining, but conventional fixed-abrasive tools have problems relating to low ...
متن کامل