The Effect of Lubricant Composition on Polyethylene Wear in Pin-on-Disc Testing
نویسندگان
چکیده
منابع مشابه
Tribological behavior of sputter-deposited MoSX/Ni coatings
AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...
متن کاملFriction and wear behaviours of medical grade UHMWPE at dry and lubricated conditions
In this investigation the friction and wear performance of GUR 1020 medical grade ultra-high molecular weight polyethylene (UHMWPE) polymer under dry sliding, distilled water and egg albumen lubrication conditions were evaluated. The sliding experiments were carried out on a pin-on-disc tribometer. The contact configuration used was a polymer pin on a rotating AISI 304L stainless steel disc. We...
متن کاملThe Effect of Chemical Composition on Wear and Microstructural Properties of Babbitt Coatings
Babbitt is a white silvery alloy that composed of Tin, Lead, Copper and Antimony. This alloy is the most current bearing alloy in industrial applications. The characteristics of this alloy, such as high wearing resistance and low coefficient of friction, have converted it into a bearing cover. The target of this study is investigation on the effects of alloy elements on wearing and micro-struct...
متن کاملThe Effect of Chemical Composition on Wear and Microstructural Properties of Babbitt Coatings
Babbitt is a white silvery alloy that composed of Tin, Lead, Copper and Antimony. This alloy is the most current bearing alloy in industrial applications. The characteristics of this alloy, such as high wearing resistance and low coefficient of friction, have converted it into a bearing cover. The target of this study is investigation on the effects of alloy elements on wearing and micro-struct...
متن کاملWear simulation of a polyethylene-on-metal cervical total disc replacement under different concentrations of bovine serum lubricant.
Metal-on-polyethylene total disc replacements have been an alternative to spinal fusion in the lumbar spine under certain indications for more than a decade. Recently, cervical total disc replacement has also become an alternative to cervical fusion. Knowledge acquired from years of in vitro simulator studies on other joint replacements has highlighted the risks associated with premature wear d...
متن کامل