Passive Downhole Pressure Sensor Based on Surface Acoustic Wave Technology
نویسندگان
چکیده
A passive surface acoustic wave (SAW) pressure sensor was developed for real-time pressure monitoring in downhole application. The passive pressure sensor consists of a SAW resonator, which is attached to a circular metal diaphragm used as a pressure transducer. While the membrane deflects as a function of pressure applied, the frequency response changes due to the variation of the SAW propagation parameters. The sensitivity and linearity of the SAW pressure sensor were measured to be 8.3 kHz/bar and 0.999, respectively. The experimental results were validated with a hybrid analytical-numerical analysis. The good results combined with the robust design and packaging for harsh environment demonstrated it to be a promising sensor for industrial applications.
منابع مشابه
TiO2 based surface acoustic wave gas sensor with modified electrode dimensions for enhanced H2 sensing application
The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...
متن کاملA Study on RF Signal Generator and Analyzer for Passive Surface Acoustic Wave based Wireless Sensors
Sensor technologies are rapidly growing and wireless measurement systems with passive surface acoustic wave (SAW) sensors are broadly used in wide variety of sensor applications. To developing and validating batter-less wireless sensors, generally frequency characteristic of the sensor is analyzed by using an oscilloscope. However, the oscilloscope based system only analyzes simple waveforms. T...
متن کاملA Wireless and Passive Low-Pressure Sensor
This paper will discuss the results obtained with a first prototype of a completely passive and wireless low pressure sensor. The device is a heat conductivity gauge, based on a wireless and passive SAW temperature sensor. The required heating energy is applied to the sensor using inductive coupling. The prototype was successfully tested in a vacuum chamber. Its equilibrium temperature changed ...
متن کاملA surface acoustic wave ICP sensor with good temperature stability.
BACKGROUND Intracranial pressure (ICP) monitoring is very important for assessing and monitoring hydrocephalus, head trauma and hypertension patients, which could lead to elevated ICP or even devastating neurological damage. The mortality rate due to these diseases could be reduced through ICP monitoring, because precautions can be taken against the brain damage. OBJECTIVE This paper presents...
متن کاملPressure and Temperature Microsensor Based on Surface Acoustic Wave in TPMS
The tire pressure monitoring system (TPMS) can not only make the driver more safety, but also save fuel and protect the tire. Tire safety is attracting the driver's attention, the United States had developed laws to enforce the TPMS installation in the car. In this paper, the basic structure and the implement method of TPMS are introduced. The SAW theory and some surface acoustic wave (SAW) tem...
متن کامل