A Cross Layer Optimization Based on Variable-Power AMC and ARQ for MIMO Systems
نویسندگان
چکیده
To improve spectrum efficiency (SE), the adaptive modulation and coding (AMC) and automatic repeat request (ARQ) scheme have been combined for MIMO systems. In this paper, we add variable power subject to power constraint in each AMC mode. We use KKT optimization algorithm to get the optimal transmit power and AMC mode boundaries. The numerical results show that the average SE is increased by about 0.5 bits/sec/Hz for 2X2 MIMO systems with Nakagami fading with parameter m=2 when SNR is around 15dB and the ARQ retransmission is twice. Keywords—transmitter power control, spectrum efficiency
منابع مشابه
Cross-layer design in AMC/ARQ-based wireless systems with cooperative relaying
Description: Recently, there have been a great deal of research efforts on cross-layer design in wireless networks (see, e.g., [1, 2, 3] and references therein). Furthermore, the past decades gave birth to a large number of innovative techniques at the physical layer (PHY) to overcome the impact of wireless fading channels and to support the diverse quality-of-service (QoS) requirements for het...
متن کاملCross-Layer Combining of Adaptive Modulation and Truncated ARQ in Multichannel Beamforming MIMO Systems
In this study the authors provide a cross-layer design of multiple-input-multiple-output (MIMO) systems, with the aim to maximize spectral efficiency. We consider MIMO systems based on a multichannel beamforming technique that combines an adaptive modulation and truncated automatic repeat request procedures, for the case of Rayleigh fading propagation and imperfect channel state information. Cl...
متن کاملDesign of Pre - Processed Cross Layered Adaptive Modulation for Mimo - Ofdm Receiver Architecture
Modern wireless communication applications are characterized by the need for advanced signal processing techniques such as Multiple-Input Multiple-Output (MIMO) technology for achieving high throughput and diversity and Orthogonal Frequency Division Multiplexing (OFDM) for achieving robustness to fading. This paper introduces techniques that increase the throughput, reduces preprocessing delay ...
متن کاملJoint-design of Link-adaptive Modulation and Coding with Adaptive Arq for Cooperative Amplify and Forward Relaying System
This paper analyzes the efficiency of a joint-design of an adaptive modulation and coding (AMC) at the physical (PHY) layer with an adaptive R max -truncated selective-repeat automatic repeat request (ARQ) protocol at the medium access control (MAC) layer to maximize the throughput of cooperative nonregenerative relay networks under prescribed delay and/or error performance constraints. Particu...
متن کاملK-NN Based Adaptive Modulation Coding (AMC) and Incremental Redundancy Hybrid Automatic Repeat Request (IR-HARQ) in MIMO
In Multiple Input Multiple Output (MIMO) technology, a cross layer design enhances the spectral efficiency, reliability and throughput of the network. In this paper, a cross-layer approach for k-NN based Adaptive Modulation Coding (AMC) and Incremental Redundancy Hybrid Automatic Repeat Request (IR-HARQ) in MIMO is proposed. The proposed cross layer approach connects physical layer and data lin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IJCNS
دوره 3 شماره
صفحات -
تاریخ انتشار 2010