Large and symmetric deflection of Acryl plate-CFRP plate laminate actuator
نویسندگان
چکیده
Unlike well-investigated polymer-based soft actuators such as gel, Ionic Polymer-Metal Composite, conducting polymer, a CFRP-based polymeric laminate possesses quite distinguished properties. It was previously reported that a CFRP-PVC laminate exhibited two-way deflection in accordance with environmental temperature, but it could not exhibit symmetric deflection because of its asymmetric structure. It must broaden the potential usefulness of the CFRP-based polymeric laminate as a soft actuator by achieving its symmetric deflection. In this study, we attempted to fabricate a new CFRP-based polymeric laminate which could exhibit symmetric deflection by electrical laminate temperature control. Despite such a successful outcome, still there was a room to improve the performance of the new CFRP-based polymeric laminate especially about the degree of its deflection. Its deflection was not so large for the actuator use. Hence, we further attempted to fabricate another CFRP-based polymeric laminate which could exhibit large and symmetric deflection under electrical control of laminate temperature. In fact, this another CFRP-based laminate exhibited symmetric deflection in accordance with temperature and the deflection was indeed enhanced.
منابع مشابه
Deflection of Cross-Ply Composite Laminates Induced by Piezoelectric Actuators
The coupling effects between the mechanical and electric properties of piezoelectric materials have drawn significant attention for their potential applications as sensors and actuators. In this investigation, two piezoelectric actuators are symmetrically surface bonded on a cross-ply composite laminate. Electric voltages with the same amplitude and opposite sign are applied to the two symmetri...
متن کاملExperimental and numerical analysis of end anchored steel plate and CFRP laminate flexurally strengthened reinforced concrete (r. c.) beams
End anchors have been shown to significantly reduce premature plate end debonding failure of plate bonded strengthened reinforced concrete (r. c.) beams. One of the main interest in designing end anchors is to determine the minimum or optimal length of end anchors for a given thickness and height of the end anchor. This paper presents experimental and numerical studies in determining those opti...
متن کاملنقش برخی از پارامترهای مؤثر بر روی واکنش به ضربه صفحات کامپوزیتی هیبریدی هوشمند
In this paper, the response of hybrid composite laminate plate reinforced by the smart wires (shape memory or the SMA wires) subjected to low velocity impact is studied. The smart wires are embedded within the layers of the composite laminate. The effect of the smart wires on contact force history, and deflection of these structures is investigated. The first-order shear deformation theory as w...
متن کاملAttenuation of Lamb Waves in CFRP Plates
The paper presents the Lamb wave attenuation of Carbon Fiber Reinforced Plastic (CFRP) plates on the basis of an experimental transmitter-sensor scheme. We measured separately the S0 and A0 Lamb modes of CFRP plates with three different kind of laminate lay-ups; unidirectional [0]8s (and [90]8s), cross-ply [0, 90]4s, and quasi-isotropic [0,45,-45,90]2s. Several ultrasound transmitters were used...
متن کاملاستفاده از روش سطح پاسخ و الگوریتم ژنتیک برای بهینهسازی چیدمان چندلایههای کامپوزیت- فلز در برابر اثرات انفجار(علمی-پژوهشی)
In this research, stacking sequences of hybrid composites composed of Aluminum plate and Carbon/Epoxy laminate under explosion loading have been optimized and analyzed. First, the effect of explosion wave on the stress, deflection field, and Tsai-Wu criteria has been investigated. Then, by using finite element modeling for these laminates and Response Surface Method (RSM) and Genetic Algorithm ...
متن کامل