Fast & Low - Power Consuming SRAM Design by Fast Precharging Using Equalizer and Sense Circuit
نویسندگان
چکیده
This paper presents a fast and low-power Static Random Access Memory (SRAM) design. SRAM are widely used in computer systems and many portable devices. Proposed SRAM is faster because of precharging at a desired voltage. For the most recent CMOS technologies leakage power dissipation has become a major concern. According to the International Technology Roadmap for Semiconductors (ITRS), leakage power dissipation may eventually dominate total power consumption as technology feature sizes shrink. To reduce overall power consumption we have to concern on both static and dynamic power consumption. Firstly, an equalizer with sense circuit was used to precharge bit-lines near voltage (VDD Vt). It reduces both static and dynamic power consumption. Aspect ratio of equalizer is high for fast precharging. Though we are precharging at desired voltage circuit is simpler than conventional SRAM.
منابع مشابه
An Efficient Sense Amplifier for SRAM using Body Biasing
This paper proposes design of a low power sense amplifier. It is designed for the low power and delay of the circuit by using the variable threshold mos devices. Sense amplifiers are used in the memories to increase the speed for accessing data from different locations. So the speed of data read of SRAM is highly reliable on the design of sense amplifiers. The introduced circuit is tested under...
متن کاملLow-Power Adder Design for Nano-Scale CMOS
A fast low-power 1-bit full adder circuit suitable for nano-scale CMOS implementation is presented. Out of the three modules in a common full-adder circuit, we have replaced one with a new design, and optimized another one, all with the goal to reduce the static power consumption. The design has been simulated and evaluated using the 65 nm PTM models.
متن کاملFast Mux-based Adder with Low Delay and Low PDP
Adders, as one of the major components of digital computing systems, have a strong influence on their performance. There are various types of adders, each of which uses a different algorithm to do addition with a certain delay. In addition to low computational delay, minimizing power consumption is also a main priority in adder circuit design. In this paper, the proposed adder is divided into s...
متن کاملEnergy Efficient Novel Design of Static Random Access Memory Memory Cell in Quantum-dot Cellular Automata Approach
This paper introduces a peculiar approach of designing Static Random Access Memory (SRAM) memory cell in Quantum-dot Cellular Automata (QCA) technique. The proposed design consists of one 3-input MG, one 5-input MG in addition to a (2×1) Multiplexer block utilizing the loop-based approach. The simulation results reveals the excellence of the proposed design. The proposed SRAM cell achieves 16% ...
متن کاملLow Power Consuming 1 KB (32 × 32) Memory Array Using Compact 7T SRAM Cell
Rapid increase in technology is showing a great perception in assessing the complexity of design that can be integrated on a single chip dramatically. Minimum feature sizes, low power consumption, minimum cost and high performance have become the key characteristics of any electronic component. All these factors have plunged the designers into the sub micron space which brings the leakage param...
متن کامل