Solubility of Two Resin Composites in Different Mouthrinses
نویسندگان
چکیده
AIM This study aimed to compare the solubility of a universal restorative resin composite (Filtek Z250; FZ250) and a silorane-based resin composite (Filtek Silorane; FS) after immersion in alcohol-containing mouthrinse, alcohol-free mouthrinse, and artificial saliva. METHODS 30 discs (10 mm × 1 mm) were prepared from each material and desiccated until a constant mass was obtained. Specimens were immersed in the test solutions for two days and desiccated again. Solubility was calculated based on the change in weight of each specimen before and after immersion. Data was analyzed using two-way ANOVA and Tukey's Post Hoc test (P < 0.05). RESULTS Solubility values for both resin composites were the highest in the alcohol-containing mouthrinse. FZ250 showed greater solubility than FS; the difference was only significant in artificial saliva. CONCLUSION Both resin-composite materials tested exhibited some degree of solubility in each of the test solutions. The use of an alcohol-free mouthrinse may be preferable for patients with extensive composite restorations.
منابع مشابه
Sorption and solubility testing of orthodontic bonding cements in different solutions.
To evaluate and compare the solubility and sorption of orthodontic bonding cements after immersion in different solutions, five different cements were used: a fluoride-containing resin composite, a light-cured glass ionomer cement, a light-cured resin composite, a paste-paste chemically cured resin composite, and a liquid-paste chemically cured resin composite. Five different solutions were emp...
متن کاملمقایسه سختی سطح چهار نوع کامپوزیت بعد از کاربرد دهانشویههای مختلف
Introduction: Plaque control by mechanical method is not sufficient and mouthrinses are highly recomended for patients. Some studies have shown that both of alcohol and alcohol free mouthrinses can reduce the microhardness of restorative materials. This study aimed to investigate the effect of three commercial mouthrinses on the microhardness of four different composite resin. Methods: 60 spec...
متن کاملColor Stability of Nanofilled and Microhybrid Resin-Based Composites Following Exposure to Chlorhexidine Mouthrinses: An In Vitro Study
OBJECTIVES This study aimed to evaluate the effects of chlorhexidine mouthrinses on color stability of nanofilled and micro-hybrid resin-based composites. MATERIALS AND METHODS In this in-vitro study, 160 disc-shaped specimens (7x2mm) were fabricated of Filtek Z250 and Filtek Z350XT Enamel (A2 shade). The samples of each group were randomly divided into eight subgroups (n=10). The specimens w...
متن کاملSorption and solubility of resin-based restorative dental materials.
OBJECTIVES To measure the water sorption and solubility of different resin-based restorative dental materials. METHODS Eight commercial restorative materials were selected: two resin composites (Z100 and Prodigy), four polyacid-modified resin composites (Compoglass, Compoglass F, Dyract and Dyract AP), and two light-cured glass ionomers (Vitremer and Fuji II LC). Five disc specimens were prep...
متن کاملEffect of a novel commercial potassium-oxalate containing tooth-desensitizing mouthrinse on the microhardness of resin composite restorative materials with different monomer compositions
BACKGROUND The effects of mouthrinses on dental resin composites have been investigated extensively. However, there is little information available regarding the effects of 'newly developed mouthrinse' formulations on the microhardness of different monomer based composite systems. Therefore, the aim of this study was to investigate the effect of a novel potassium-oxalate containing desensitizin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2014 شماره
صفحات -
تاریخ انتشار 2014