Effect of Prestraining and Training on the γ→ Transformation in Fe-Mn-Si Alloys
نویسندگان
چکیده
The effect of training and predeformation on the martensitic transformation is investigated. It is concluded that Ms as a function of predeformation strain must have a maximum at around 3% strain. Prestrains less than 5% will enhance the martensitic transformation whereas larger prestrains depress it due to strain hardening of the y phase.
منابع مشابه
The effect of cyclic martensitic transformations on diffusion of cobalt atoms in Fe-18wt.%Mn-2wt.%Si alloy
Diffusion characteristics of cobalt atoms were investigated using radioactive isotope method in phase-hardened Fe-18wt.%Mn-2wt.%Si alloy. The observed significant increase of diffusion coefficient of cobalt atoms under the cyclic γ-ε-γ martensitic transformations was due to the action of two independent mechanisms - an athermal one and a thermally activated one. The first one arose from the dir...
متن کاملProduction and Characterization of Stainless Steel Based Fe-Cr-Ni-Mn-Si(-CO) Shape Memory Alloys
It is well known that the Fe based alloys can exhibit shape memory effect due to the y to E martensitic transformation. The effect may not be as striking as observed in the NiTi alloy but it might become attractive fkom the practical point of view. In this work, two compositions of Fe-Cr-Ni-Mn-Si(-Co) stainless steel based shape memory alloy, prepared by the VIM technique, will be presented. Th...
متن کاملCoupling Binary and Ternary Information in Assessing the Fcc/Hcp Relative Phase Stability and Martensitic Transformation in Fe-Mn-Co and Fe-Mn-Si Alloys
This paper presents a study of the composition dependence of the fcchcp martensitic transformation temperatures and relative phase stability of these structures in Fe-Mn-Co and Fe-Mn-Si alloys. The approach combines new experimental determinations of M, and A, in the binary systems Fe-Mn and Fe-Co, and in both ternary systems with a critical analysis of the previously published experimental dat...
متن کاملThe Magnetic Aspects of the γ-α and γ- Martensitic Transformations in Fe-Mn Alloys
Fe,,Mn, alloys undergo fcc-bcc (y-a) and fcc-hcp (y-E) transformations for about 0<x<10 at % and 15<x<30 at% respectively. The product phase in the region 10<x<15 at. % is mixed a+€ and ~ + y . The y-a transformation in Fe-Mn is similar to that in Fe-rich Fe-Ni alloys where the transformation takes place between a high-temperature dense fcc structure and a lowtemperature more open bcc structure...
متن کاملEffect of Amount of Deformation on the Martensitic Transformation and Shape Memory Effect in Fe-Mn-Si based Shape Memory Steel
The effect of amount of deformation on the martensitic transformation and shape memory effect in a Fe-16Mn-5Si-9Cr-4Ni alloy is studied. It is found that both 6and a'martensite are induced by deformation. With increasing amount of deformation, y+~-nx' transformation is greatly enhanced. the highest shape memory strain 3 3% is reached when the amount of deformation is about 5%.
متن کامل