FABRICS II : a statistical simulator of the IC Fabrica process
نویسندگان
چکیده
منابع مشابه
Effect of Abrasion Process on Reflectance Factor and Color Change of Chenille Woven Fabrics
This paper focuses on effect of abrasion process on color and reflectance factor changes of dyed woven fabrics containing 100% acrylic chenille yarns in weft and cotton warp yarns. Three fabrics having 12, 14 and 16 weft per centimeter were dyed with three basic dyes in different hues. Four different abrasion levels, i.e. 50,200,400 and 650 were selected to abrade samples. The obtained results ...
متن کاملایجاد یک شاخص عددی جهت اندازه گیری میزان بارکاری در شبیه ساز وظایف خلبان
Introduction: Pilot performance investigation during multi-tasking operations requires a procedure, in which the parameters related to the desired scenario of the simulator are obtained in a systematic manner. The multi-attribute task battery (MATB-II) is a standard simulator of generic piloting tasks developed by national aeronautics and space administration (NASA). Methods: Employing infor...
متن کاملGreen Dyeing of Silk Fabrics in the Presence of Pomegranate Extract as Natural Mordant
An ecological approach has been obtained by using natural dyes and mordant for dyeing process. Silk fabrics dyed using natural mordants: powder of sour pomegranate and sweet pomegranate and mixture them. A beautiful red color were obtained by using theses mordants. The color of dyed silk fabrics was investigated in CIE Lab L, a and b and K/S values. Finally, all dyed fabrics were tested for was...
متن کاملDyeing Properties and Color Fabrics Using Natural Dye and Mordant
An ecological approach has been obtained by using natural dyes and mordant for dyeing process. Fabrics dyed using myrobalan extract as natural mordants and green dye. A red color were obtained by using theses mordants. The color of dyed fabrics was investigated in CIELab L, a and b and K/S values. Finally, all dyed fabrics were tested for wash and light fastness properties as per ISO standard t...
متن کاملNew phase II control chart for monitoring ordinal contingency table based processes
In some statistical process monitoring applications, quality of a process or product is described by more than one ordinal factors called ordinal multivariate process. To show the relationship between these factors, an ordinal contingency table is used and modeled with ordinal log-linear model. In this paper, a new control charts based on ordinal-normal statistic is developed to monitor the ord...
متن کامل