Rational Transfer Functions with Minimum Impulse Response Moments
نویسندگان
چکیده
The lowpass systems with minimum higher order moments of the impulse response are presented. The systems have the largest possible energy concentration in time. The optimization of the transfer function parameters is carried out for the functions ranging from the second to the tenth order, with finite zeros. The optimum pole-zero positions suitable for filter design are given together with properties of the systems.
منابع مشابه
Rational transfer functions with minimum timebandwidth products
Transfer functions with finite zeros giving the minimum product of the impulse response duration and the frequency bandwidth are considered. The impulse response spread is characterized by the higher order moments. For the frequency spread measure, the second order moment is used. Minimizing products of the moments, causal systems with the largest energy concentration in time for a given bandwi...
متن کاملFilter families with minimum impulse response moments
The lowpass systems with minimum higher order moments of the impulse response are presented. The optimization of the transfer function parameters is carried out for functions ranging from the second to the tenth order, with zeros at infinity. Besides the system order, no other requirements are set to restrict the frequency domain behavior of the system. Time and frequency domain properties of t...
متن کاملFilter families with minimum time-bandwidth products
A filter family with minimum product of the impulse response duration and the frequency bandwidth is considered. The impulse response spread is characterized by the higher order moments. For the frequency spread measure, the second order moment is used. Minimizing products of the moments, causal systems with the largest energy concentration in time for a given bandwidth are obtained. The result...
متن کاملCharacteristics of Unknown Linear Systems Deduced from Measured CW Magnitude
A method is presented for predicting the total response, in both frequency and time, of an unknown linear system when only the measured continuous wave (cw) magnitude is available. The approach is based on approximating the square of the measured magnitude by a rational function, from which various system transfer functions in terms of complex frequency are deduced. These transfer functions may...
متن کاملANALYTICAL MODELING OF DELAY AND SLEW FOR On-Chip VLSI RC GLOBAL INTERCONNECT USING THREE CIRCUIT MOMENTS
In high speed digital integrated circuits, interconnects delay can be significant and should be included for accurate analysis. Delay analysis for interconnect has been done widely by using moments of the impulse response, from the explicit Elmore delay (the first moment of the impulse response) expression, to moment matching methods which creates reduced order trans impedance and transfer func...
متن کامل