Direct Method of Manipulator Endpoint Control Synthesis
نویسندگان
چکیده
Manipulator endpoint location autonomous control procedures are suggested. A method of uplimited control hierarchy has been designed, which allows to provide a desired tracking precision under conditions of uncertainty of the control object operator and the effect of external unmeasured disturbances. Sliding mode state observers synthesis procedures have been designed, which allow, in a theoretically limited time interval, to obtain information on immeasurable variables of the state vector and available uncertainty. The results of the designed algorithms modeling are presented. Copyright © 2008 IFAC
منابع مشابه
Adaptive Voltage-based Control of Direct-drive Robots Driven by Permanent Magnet Synchronous Motors
Tracking control of the direct-drive robot manipulators in high-speed is a challenging problem. The Coriolis and centrifugal torques become dominant in the high-speed motion control. The dynamical model of the robotic system including the robot manipulator and actuators is highly nonlinear, heavily coupled, uncertain and computationally extensive in non-companion form. In order to overcome thes...
متن کامل3-RPS Parallel Manipulator Dynamical Modelling and Control Based on SMC and FL Methods
In this paper, a dynamical model-based SMC (Sliding Mode Control) is proposed fortrajectory tracking of a 3-RPS (Revolute, Prismatic, Spherical) parallel manipulator. With ignoring smallinertial effects of all legs and joints compared with those of the end-effector of 3-RPS, the dynamical model ofthe manipulator is developed based on Lagrange method. By removing the unknown Lagrange multipliers...
متن کاملVoltage Control Strategy for Direct-drive Robots Driven by Permanent Magnet Synchronous Motors
Torque control strategy is a common strategy to control robotic manipulators. However, it becomes complex duo to manipulator dynamics. In addition, position control of Permanent Magnet Synchronous Motors (PMSMs) is a complicated control. Therefore, tracking control of robots driven by PMSMs is a challenging problem. This article presents a novel tracking control of electrically driven robots wh...
متن کاملModifying a Conventional Grasping Control Approach for Undesired Slippage Control in Cooperating Manipulator Systems
There have been many researches on object grasping in cooperating systems assuming no object slippage and stable grasp and the control system is designed to keep the contact force inside the friction cone to prevent the slippage. However undesired slippage can occur due to environmental conditions and many other reasons. In this research, dynamic analysis and control synthesis of a cooperating ...
متن کاملTheory and Experiments on the Compliance Control of Redundant Manipulators
2. UNSTRUCTURED MODELING OF THE SECONDARY MANIPULA TOR The primary manipulator is assumed to have a trajectory controller for positioning its endpoint (i.e. the base of the secondary manipulator). Several linear and nonlinear control methods can be used to develop this trajectory controller. However, the concern here is the control and modeling of the secondary manipulator. The secondary manipu...
متن کامل