Design of Substrate Integrated Waveguide Components
نویسندگان
چکیده
This paper presents an overview of substrate integrated waveguide (SIW) design activities at the University of Victoria. Mode-matching techniques (MMTs) are employed to facilitate the design of planar SIW circuits as well as surface mounted waveguide (SMW) components. Active component integration and antenna design employ commercially available field solvers. Each category is highlighted by a sample component, comparing theoretical and/or measured results for K-band applications. Good agreement between simulated and experimental results is observed. Keywords—substrate integrated waveguide; surface mounted waveguide; mode-matching technique; computer-aided design; low-noise amplifier; printed-circuit antennas.
منابع مشابه
Filtering Power Divider/Combiner Based on Half Mode Substrate Integrated Waveguide (HMSIW) Technology for High Power Applications
A filtering power divider/power combiner based on half mode substrate integrated waveguide technology for high power applications is proposed. This design includes one half mode substrate integrated waveguide cavity, one matched load, and four sections of quarter-wavelength transmission lines. The high isolation between output ports is obtained by combining the half mode substrate integrated wa...
متن کاملDesign Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کاملWLAN Substrate Integrated Waveguide Filter with Novel Negative Coupling Structure
A fourth-degree Substrate Integrated Waveguide (SIW) crossed coupled band pass filter for WLAN band is designed by using a new negative coupling structure. It consists of two U shape microstrip lines on top and bottom planes with via holes at the center of them. This paper investigates the phase characteristics of negative and positive coupling structures and their effects. The design, fabricat...
متن کاملDesign and Development of High Gain, Low Profile and Circularly Polarized Cavity-backed Slot Antennas Using High-order Modes of Square Shaped Substrtae Integrated Waveguide Resonator
In In this paper, two low profile, single fed cavity backed slot antennas providing a circularly polarized (CP) wave are introduced. One of the antennas presents a right-handed CP (RHCP) wave, while the other one offers a left handed CP (LHCP) wave. The proposed antennas consist of a square shaped Substrtae Integrated Waveguide (SIW) cavity incorporatng two couples of radiating slots to radiate...
متن کاملDesign of Rotman Lens Antenna at Ku-Band Based on Substrate Integrated Technology
In this research work, a multibeam antenna which is a combination of a beamformer network (BFN) and a linear array antenna, has been designed. A Rotman lens has been chosen as beamformer network and Vivaldi antennas have been selected for constructing array antenna. The Substrate Integrated Waveguide (SIW) was used for implementing Rotman lens. After explanation the structure of Substrate integ...
متن کاملHigh Q Power Divider/Combiner with High Output Isolation using Substrate Integrated Waveguide Technology
A power divider (PD)/ power combiner (PC) with high quality factor and enhanced output ports isolation using substrate integrated waveguide (SIW) technology is proposed. An SIW cavity is designed to provide a high quality factor filtering response and an SMD resistor is attached between two output ports to realize the high isolation. The value of the applied resistor is calculated by using the ...
متن کامل