Noise Reduction in Butterfly Valve Cavitation by Semicircular Fins and Visualization of Cavitation Flow
نویسنده
چکیده
منابع مشابه
Investigation of the Flow and Cavitation in a Butterfly Valve
Since knowledge on hydrodynamic torque of a butterfly valve is very important for butterfly valve design, its hydrodynamic torque is investigated in this paper. In reality, the investigation of the loss coefficient and torque from some experiments will take a long time and a lot of money. This paper presents a statistical study of the flow past the butterfly valve in a static analysis using com...
متن کاملNumerical Simulation of Cavitation in Mixed Flow Pump
The purpose of this study is to investigate the performance and three-dimensional behavior of the flow in a mixed flow pump and the way cavitation phenomenon is affected by different parameters such as fluid temperature, pump speed and flow rate. Computational fluid dynamic software FLUENT 6.3 was utilized to simulate the whole flow field of the pump. RNG k-ε model combined with standard wall f...
متن کاملNumerical prediction and experimental verification of cavitation of Globe type Control Valves
Globe valves are one of the oldest types of valve used for throttling applications for all sizes due to better controllability and wider range. One of the major limitations associated with the use globe valves in liquid application is cavitation and it takes place both in part open and in fully open conditions due to varied reasons. There are different designs of globe valves available but for ...
متن کاملInfluence of nozzle geometry and injection conditions on the cavitation flow inside a diesel injector
Cavitation and turbulence in a diesel injector nozzle has a great effect on the development and primary breakup of spray. However, the mechanism of the cavitation flow inside the nozzle and its influence on spray characteristics have not been clearly known yet because of the internal nozzle flow complexities. In this paper, a comprehensive numerical simulation is carried out to study the intern...
متن کاملInfluence of Afterbody and Boundary Layer on Cavitating Flow
The characteristics of a cavitation water tunnel test setup and the experiments of cavitation around different models are given in this paper. Models of test are formed from combination of head and variable length afterbody. The experiments are performed initially with the smooth head and then with the roughened head. Cavitation initiates both in the wake and after the head. If the nose of mode...
متن کامل