Investigations into Recycling Zinc from Used Metal Oxide Varistors via pH Selective Leaching: Characterization, Leaching, and Residue Analysis
نویسندگان
چکیده
Metal oxide varistors (MOVs) are a type of resistor with significantly nonlinear current-voltage characteristics commonly used in power lines to protect against overvoltages. If a proper recycling plan is developed MOVs can be an excellent source of secondary zinc because they contain over 90 weight percent zinc oxide. The oxides of antimony, bismuth, and to a lesser degree cobalt, manganese, and nickel are also present in varistors. Characterization of the MOV showed that cobalt, nickel, and manganese were not present in the varistor material at concentrations greater than one weight percent. This investigation determined whether a pH selective dissolution (leaching) process can be utilized as a starting point for hydrometallurgical recycling of the zinc in MOVs. This investigation showed it was possible to selectively leach zinc from the MOV without coleaching of bismuth and antimony by selecting a suitable pH, mainly higher than 3 for acids investigated. It was not possible to leach zinc without coleaching of manganese, cobalt, and nickel. It can be concluded from results obtained with the acids used, acetic, hydrochloric, nitric, and sulfuric, that sulfate leaching produced the most desirable results with respect to zinc leaching and it is also used extensively in industrial zinc production.
منابع مشابه
Leaching Kinetics of Zinc from Metal Oxide Varistors (MOVs) with Sulfuric Acid
Abstract: The leaching kinetics of zinc from zinc oxide-based metal oxide varistors (MOVs) was investigated in H2SO4 at atmospheric pressure. Kinetics experiments were carried out at various agitation speeds, particle sizes, initial H2SO4 concentrations, and reaction temperatures. It was determined that the leaching rate of zinc was independent of agitation speed above 300 rpm and also independ...
متن کاملLeaching of Zinc Oxide in Acidic Solution
Leaching mechanism of zinc oxide is important not only to understand zinc smelting process but also to develop of new zinc recycling process. Recycling of zinc is mainly done by treatment of electric arc furnace dust (EAF dust). In Japan pyro metallurgical process is enhanced for EAF dust treatment, however only zinc oxide can be recovered by pyro metallurgical process. Hydro metallurgical proc...
متن کاملLeaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue
This paper reports on the recovery of zinc, cobalt and manganese by two-step leaching of zinc-plants purification residue with sulfuric acid. The residue, hot filter press cake (HFC), contains 14 % ZnO, 4.8 % Co3O4 and 22.9 % MnO. Effects of different parameters are determined and used to optimize the process. With acid to hot filter press cake (HFC) stoichiometry of 0.85, acid concentration of...
متن کاملLeaching of DOC, DN, and inorganic constituents from scrap tires.
One concern for recycle and reuse of scrap tires is the leaching of tire constituents (organic and inorganic) with time, and their subsequent potential harmful impacts in environment. The main objective of this study was to examine the leaching of dissolved organic carbon (DOC), dissolved nitrogen (DN), and selected inorganic constituents from scrap tires. Different sizes of tire chips and crum...
متن کاملFeasibility of Recycling Ultrafine Leaching Residue by Backfill: Experimental and CFD Approaches
Large amounts of leaching residue are released into tailings dams from mines, and their acid content can cause environmental pollution. The aim of this study was to research the feasibility and value of a leaching residue backfill recycling method. The combination of property detection, laboratory tests (the neutralization method, strength test and diffusivity test) and numerical simulation met...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2015 شماره
صفحات -
تاریخ انتشار 2015