Whole-body vibratory response study using a nonlinear multi-body model of seat-occupant system with viscoelastic flexible polyurethane foam.

نویسندگان

  • Gauri Joshi
  • Anil K Bajaj
  • Patricia Davies
چکیده

Vehicle occupants are exposed to low frequency vibrations with possible harmful effects such as mild discomfort, lower back pain, and even injury to the spine. Occupational drivers and operators of heavy machinery are exposed to significantly longer duration and higher levels of vibration. Thus, the modeling and prediction of biodynamic response of seated occupants to such vibrations is very important. Since the properties of seating foam affect the response of the occupant, there is need for good models of seat-occupant systems through which the effects of foam properties on the dynamic response can be directly evaluated. A nonlinear planar seat-occupant model which incorporates the nonlinear viscoelastic behavior of seating foam has been developed. This model is used to study response of the occupant to harmonic excitation applied at the seat base, in terms of the frequency response in vertical and fore-and-aft directions, the deflection shapes at resonance, as well as the seat-to-head-transmissibility. In addition, to better understand the role of flexible polyurethane foam in characterizing the system behavior, the response of a single-degree-of-freedom foam-block system is also studied. The effects of different masses riding on the foam block and undergoing vertical vibrations at different acceleration levels are also investigated.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study on the vertical vibration of an occupant - seat cushion system

Dynamic interaction between a human body and the seat cushion was addressed, aiming at seat design for better NVH performance of a passenger vehicle. Referring to DIN EN ISO 3386-1 and previously researches, static and dynamic tests were conducted on polyurethane foams typically used as vehicle seat cushions. A one-dimensional stress strain relation was derived based on the measured data, in wh...

متن کامل

Vibration characteristics of tractor seat cushion materials

Operators of agricultural machinery are exposed to an extensive range of indirect vibrations through the seats, which gradually causes chronic damages. One of the ways to reduce the vibrations imposed on the operators is to use appropriate materials in tractor seat cushion. The present study was carried out in order to select appropriate foam or sponge and investigate different factors in reduc...

متن کامل

Modeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates

Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...

متن کامل

Influence of seat foam and geometrical properties on BioRID P3 kinematic response to rear impacts.

As the primary interface with the human body during rear impact, the automotive seat holds great promise for mitigation of Whiplash Associated Disorders (WAD). Recent research has chronicled the potential influence of both seat geometrical and constitutive properties on occupant dynamics and injury potential. Geometrical elements such as reduced head to head restraint, rearward offset, and incr...

متن کامل

A Nonlinear Fractional Derivative Model for Cyclic Compressive Foam Behavior

In quasi-static tests, flexible polyurethane foam undergoing large compressive loading and unloading deformation exhibits highly nonlinear and viscoelastic behavior. In particular, the response in the first cycle is significantly different from the response in subsequent cycles. In addition, the stresses in the loading paths are higher than those in unloading paths. It is assumed that this quas...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Industrial health

دوره 48 5  شماره 

صفحات  -

تاریخ انتشار 2010