Investigation of indium ions removal from aqueous solutions using spent coffee grounds
نویسندگان
چکیده
This study used batch adsorption techniques to evaluate the potential suitability of spent coffee grounds as an environmentally friendly adsorbent for the removal of indium ions from aqueous solutions. In addition, we also investigated the effects of process parameters, such as, the solution pH, adsorbent dose, initial concentration of indium ions and the temperature on adsorption performance. The experimental data were fitted with several adsorption isotherm models to describe the adsorption process of indium ions onto the coffee grounds. The predictions of the Langmuir isotherm model satisfactorily matched the experimental observations. Besides, the kinetic data obtained at different initial concentrations were analyzed using pseudo-first-order and pseudo-second-order kinetic models. A pseudo-second-order model provided a good fit to the experimental results with correlation coefficients greater than 0.99. Thermodynamic parameters, including the Gibbs free energy, enthalpy and entropy, indicated that the indium adsorption of aqueous solutions onto coffee grounds was feasible, spontaneous and endothermic in the temperature range of 288 to 318 K.
منابع مشابه
Spent Coffee Grounds as Adsorbents for Pesticide Paraquat Removal from its Aqueous Solutions
Spent coffee grounds were evaluated for adsorption efficiency in the removal of pesticide paraquat from its aqueous solutions. The influence of the adsorbent mass, agitation time, paraquat concentration and pH have been investigated in the batch sorption mode. Adsorption capacity (mg/g) has been found to be 27.87 ± 1.57 mg/g, while the removal efficiency has resulted of 32.25 ± 1.79 %. Adsorpti...
متن کاملRemoval of copper ions from aqueous solutions using polypyrrole and its nanocomposites
In this article, preparation of polypyrrole and its nanocomposites as adsorbents werediscussed and the capability of separation of copper ions from aqueous solution were studied.Polypyrrole was prepared by chemical oxidative polymerization method of pyrrole usingFeCl3 as an oxidant. The removal of Cu (II) was investigated using PPy, PPy/TiO2 andPPy/TiO2/DHSNa nanocomposites. The products were i...
متن کاملThe kinetics of the removal of copper ions from aqueous solutions using magnetic nanoparticles supported on activated carbon
Removal of Cu(II) from aqueous solution supplies is possible through the process of adsorption. One of these processes involves the preparation of magnetic nanoparticles on activated carbon (AC). Adsorbed coppre ions on the surface of Fe3O4-AC are separated from aqueous solutions using external magnetic fields. In the present study, magnetic nanoparticles were synthesized ...
متن کاملRemoval of Ni (II) ions from Aqueous Solutions Using Origanum majorana-Capped Silver NanoParticles Synthesis Eequilibrium
The applicability of Origanum majorana-Capped Silver nanoparticles synthesis for removing Ni (II) ions from aqueous solutions has been reported. This novel material was characterized by different techniques such as FT-IR, XRD and SEM. The influence of nanoparticle dosage, pH of the sample solution, individual ions concentration, temperature, contact time between the sample and the adsorbent wer...
متن کاملRemoval of thiocyanate ions from aqueous solutions using polypyrrole and polyaniline conducting electroactive polymers
Polypyrrole (PPy/Cl) and polyaniline (PAni/Cl) synthesized chemically onto sawdust (SD)was used for removal of thiocyanate (SCN-) ions from aqueous solutions. The effect of someimportant parameters such as pH, initial concentration, sorbent dosage, and contact time onuptake of SCN- was investigated. PPy/SD was found to be much more effective sorbent thanPAni/SD for uptake SCN- from aqueous solu...
متن کامل