Recent Development in Laser Materials Processing
نویسندگان
چکیده
Recent research and development in laser machining and laser forming processes is reviewed. In the laser machining area, striation formation and prediction, and gas jet workpiece interactions are discussed. In the laser forming area, strain rate effects, and convex forming are presented.
منابع مشابه
Sub-critical water as a green solvent for production of valuable materials from agricultural waste biomass: A review of recent work
Agricultural waste biomass generated from agricultural production and food processing industry are abundant, such as durian peel, mango peel, corn straw, rice bran, corn shell, potato peel and many more. Due to low commercial value, these wastes are disposed in landfill, which if not managed properly may cause environmental problems. Currently, environmental laws and regulations pertaining to ...
متن کاملChallenge to advanced laser materials processing in Japanese industry
Japan is one of the most advanced countries in manufacturing technology, and lasers have played an important role in the advancement of manufacturing technology in a variety of industrial fields. The contribution of laser materials processing to Japanese industry is significant for both macroprocessing and microprocessing. The present paper describes the recent trend and topics of industrial ap...
متن کاملNumerical Simulation Of Heat Affected Zone Microstructure During Laser Surface Melting
Microstructural changes during laser welding and laser surface treatment has been regarded by many researchers. Most researches have focused on studying the effect of various process parameters on the size and microstructure of the heat affected zone. But some studies show that the initial microstructure of the base metal can also affect the heat affected zone dimensions and final microstructur...
متن کاملInfluence of shielding gas composition on weld structure in pulsed Nd: YAG laser welding
This work studied the effect of additions of carbon dioxide to argon shielding gas on the weld shape and microstructure of ST14 steel in pulsed Nd: YAG laser welding. By additions of carbon dioxide up to 15%,the weld area and depth/width ratio decreases while rising of carbon dioxide up to 25% causes increasing of weld area and depth/width ratio. It is observed that the weld metal microstructur...
متن کاملNovel ultrashort pulse fiber lasers for micromachining applications
The development of ultrashort pulse laser technology will have a strong impact on the advancement of laser machining. Ultrashort laser pulses can reduce the heat-affected zone and the shock-affected zone, resulting in much cleaner cuts, and therefore higher precision. Also, ultrashort laser pulses have shown remarkable promise for processing transparent materials such as glass, fused silica, an...
متن کامل