Low Power 3T XOR Cell using IDDG MOSFET
نویسندگان
چکیده
In this paper, a new design of three transistor XOR gate is proposed using Independent Driven Double Gate MOSFET to achieve ultra-low power in sub threshold conduction. The proposed design has been compared with the three transistor XOR implemented using Symmetrical Driven Double Gate MOSFET in sub threshold region. A three transistor XOR gate designed using Independent Driven Double Gate MOSFET is showing improved results in terms of power consumption with varying input voltage, temperature and operating frequencies. The simulation has been carried out on SPICE tool at 45 nm technology.
منابع مشابه
Comparative Performance Analysis of XOR- XNOR Function Based High-Speed CMOS Full Adder Circuits For Low Voltage VLSI Design
This paper presents comparative study of high-speed, low-power and low voltage full adder circuits. Our approach is based on XOR-XNOR design full adder circuits in a single unit. A low power and high performance 9T full adder cell using a design style called “XOR (3T)” is discussed. The designed circuit commands a high degree of regularity and symmetric higher density than the conventional CMOS...
متن کاملA New Design of Full Adder based on XNOR-XOR Circuit
This paper presents pre-layout simulations of a proposed 8T full adder design using a proposed 3T XNOR gate cell. The proposed design remarkably reduces power consumption hence power-delay product (PDP) over various input voltages and frequencies. It also improves temperature sustainability as compared to the existing 8T full adder. This proves to be a viable option for low power and energy eff...
متن کاملAnalysis of Conventional CMOS and FinFET based 6-T XOR-XNOR Circuit at 45nm Technology
As technology has scaled down, the implications of leakage current and power analysis for memory design have increased. To minimize the short channel effect Double-gate FinFET can be used in place of conventional MOSFET circuits due to the self-alignment of the two gates. Design for XOR and XNOR circuits is suggested to improve the speed and power. These circuits act as basic building blocks fo...
متن کاملNovel Defect Terminolgy Beside Evaluation And Design Fault Tolerant Logic Gates In Quantum-Dot Cellular Automata
Quantum dot Cellular Automata (QCA) is one of the important nano-level technologies for implementation of both combinational and sequential systems. QCA have the potential to achieve low power dissipation and operate high speed at THZ frequencies. However large probability of occurrence fabrication defects in QCA, is a fundamental challenge to use this emerging technology. Because of these vari...
متن کاملA Low Power Full Adder Cell based on Carbon Nanotube FET for Arithmetic Units
In this paper, a full adder cell based on majority function using Carbon-Nanotube Field-Effect Transistor (CNFET) technology is presented. CNFETs possess considerable features that lead to their wide usage in digital circuits design. For the design of the cell input capacitors and inverters are used. These kinds of design method cause a high degree of regularity and simplicity. The proposed des...
متن کامل