Fabrication and in/ex situ XPS Characterization of Rh Nanoparticles

نویسندگان

  • Yuki Koda
  • Hirosuke Sumida
  • Satoshi Ogawa
  • Chie Tsukada
  • Hirofumi Namatame
چکیده

Rh nanoparticles have been fabricated by the evaporation method using the He gas in the Rh evaporation chamber, connected with the pre-evacuation chamber of BL6N1 at Aichi Synchrotron Radiation Center (Aichi SR). The electronic and geometric properties of the Rh nanoparticles have been verified without atmosphere exposure (in situ XPS) and after atmosphere exposure (ex situ XPS) using SR-XPS and TEM. The size of Rh nanoparticles is estimated 1.8±0.5 nm in diameter and deposited on a substrate. Judging from the result of the in situ XPS analysis with photon energy of 2.0 keV and 3.5 keV, the surface of the deposited Rh nanoparticles without atmosphere exposure is the metallic state. On the other side, the outermost surface changes into Rh oxide after atmosphere exposure even in a short time. For a long time atmosphere exposure moreover, the Rh oxide increases in the depth direction, and the deep area is in the higher oxidation state. [DOI: 10.1380/ejssnt.2017.50]

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ex-situ studies on calcinations of structural, optical and morphological properties of post-growth nanoparticles CeO2 by HRTEM and SAED

Nanocrystalline particles of Cerium Oxide (CeO2) have been prepared by the chemical precipitation method using Cerium nitrate and Urea with a molar ratio of 1:2. The results revealed that the formation of CeO2 fine particles is influenced by molar ratio of metal nitrates to fuel. Well faceted CeO2 nanoparticles, were synthesized by thermal-assisted dissociation ...

متن کامل

Ex-situ studies on calcinations of structural, optical and morphological properties of post-growth nanoparticles CeO2 by HRTEM and SAED

Nanocrystalline particles of Cerium Oxide (CeO2) have been prepared by the chemical precipitation method using Cerium nitrate and Urea with a molar ratio of 1:2. The results revealed that the formation of CeO2 fine particles is influenced by molar ratio of metal nitrates to fuel. Well faceted CeO2 nanoparticles, were synthesized by thermal-assisted dissociation ...

متن کامل

Fabrication of Ti3SiC‌‌2-SiC max phase composites via in-situ and ex-situ synthesis

Recently, a series of three-component compounds with the combination of Mn+1AXn known as Max phases have been considered as a new material. One of the most important features of Max phases, is the self-healing property of them. The main reason for considering Max Phases is a unique collection of unusual properties including their metallic, ceramic, physical, and mechanical properties. One of th...

متن کامل

CHARACTERIZATION OF Au-Rh AND Au-Mo BIMETALLIC NANOCLUSTERS ON TiO2(110): A COMPARATIVE STUDY

Gold-rhodium and gold-molybdenum layers were prepared on a nearly stoichiometric titania and characterized by LEIS, XPS and STM. In the Au-Rh bimetallic system, Rh atoms impinged onto Au clusters pregrown on TiO2(110) became covered by gold atoms. In contrast, Mo caused the disruption of gold nanoparticles.

متن کامل

Incorporation of 12-Tungstophosphoric acid in Titania spheres and fabrication of core-shell Polyoxotungstate/Titania nanostructures

Core-shell 12-tungstophosphoric acid/TiO2 (HPW/TiO2) nanoparticles at 10 and 20% of HPW have been synthesized by simple in-situ sol- gel method. Characterization of the samples was carried out by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared (FTIR). The X-ray diffraction patterns of as prepared solid samples, indicated characterist...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017