Modeling for surge control of centrifugal compresssors: comparison with experiment
نویسندگان
چکیده
A dynamic model based on the thermoand ‡uidmechanic processes taking place in a centrifugal compressor is validated. The background for this is the need for a energy based model including the rotational speed as a state in order to perform energy based active surge control. The response of the model is compared with experimental results from the Energy Technology Laboratory at Eindhoven University of Technology. Both the calculated compressor characteristic and transient responses for set point changes and in-surge response were compared to experiment with good results.
منابع مشابه
Centrifugal Compressor Surge, Modeling and Identification for Control
In this chapter a general introduction of centrifugal compression systems is presented. The unstable surge phenomenon in compressors is discussed, as well as possible means to avoid or suppress this instability. From an assessment of the current state of the art in control-oriented modeling and identification, the research objectives are formulated. 1.1 General introduction The general topic of...
متن کاملBond graph modeling of centrifugal compression systems
Abstract A novel method of modeling centrifugal compression systems for surge control purposes by using bond graphs is presented. By using the bond graph method, we get a simple description of compression systems based on physical phenomena and it is straight forward to get the dynamic equations. It is demonstrated that several active surge control methods can be represented by the same bond gr...
متن کاملDevelopment of a compression system dynamic simulation code for testing and designing of anti-surge control system
In recent years, several research activities have been conducted to develop knowledge in analysis, design and optimization of compressor anti-surge control system. Since the anti-surge control testing on a full-scale compressor is limited to possible consequences of failure, and also the experimental facility can be expensive to set up control strategies and logic, design process often involves...
متن کاملModeling and Control of Surge and Rotating Stall in Compressors Dr.ing. thesis
This thesis contains new results in the eld of modeling and control of rotating stall and surge in compressors. A close coupled valve is included in the Moore-Greitzer compression system model and controllers for both surge and rotating stall is derived using backstepping. Disturbances, constant and time varying, are then taken into account, and nonlinear controllers are derived. Stability resu...
متن کاملActive surge control of centrifugal compression systems
This thesis addresses modeling and active surge control of a simple compression system, using only the drive system of the compressor for actuation. Theoretical results are validated by experiments on a test rig that was built as a part of this work. Control laws are derived in two stages. First all system states, such as pressure mass ‡ow and impeller speed, are assumed as available signals. A...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000