The Post Processing Developing of Five-axis CNC Machine
نویسندگان
چکیده
In this study, we have a research of the methods of the special post processing program developing of Five-axis CNC machine DMC 70ev. On the basis of analysis about the characteristics of MILLPLUS IT V530 CNumerical control system, special post processor applied to five-axis CNC machining mode based on IMSPost was developed. Special post processing program developed was proved its accuracy and reliability by put it into practice. The research results has important significance for post processing developing of other types of five-axis CNC machines and provides a guideline for the post processing program of other CAD/CAM
منابع مشابه
Five-axis NURBS Path Real-time Generation Method in CNC System
Abstract A real-time path generation method with Non Uniform Rational B Spline(NURBS) technology in the Computer Aided Design(CAD) field is presented and realized in a five-axis Computer Numerically Controlled(CNC) system. In this method, the tool path was represented into two NURBS curves, tooltip and tool-orientation spline curve, based on the same knot vector. The Cutter Location(CL) data wa...
متن کاملAdjustment and Compensation Techniques for the Rotary Axes of Five-axis CNC Machine Tools
Five-axis computer numerical control (CNC) machine tools (three linear and two rotary axes) are ideally suited to the fabrication of complex work pieces, such as dies, turbo blades, and cams. The locations of the axis average line and centerline of the rotary axes strongly influence the performance of these machines; however, techniques to compensate for eccentric error in the rotary axes remai...
متن کاملResearch and Development of A Hybrid Rapid Manufacturing Process
This paper presents the research and development of a hybrid rapid manufacturing process being developed at the University of Missouri-Rolla. This process includes a laser deposition and a 5axis CNC milling system. By combining laser deposition and machining processes, the resulting hybrid process can provide greater build capability and better accuracy and surface finish. The hybrid process ca...
متن کاملGeneral stiffness model for five-axis CNC machining
Five-axis CNC machining has become an important method for processing thin-walled parts. However, compared with the traditional three-axis machine system, the tool path planning becomes more difficult especially in high-speed and accuracy machining process. In this paper, taking into consideration the rigidity establishes a general stiffness model in order to increase the surface quality, restr...
متن کاملMethodology to Determine Kinematic Parameters for the Postprocessor of Multi-axis Cnc Milling Center
Kinematic models for post processors have been developed for different multi-axis machining centers, but the actual values which define the kinematic model can be obtained by using expensive measurement equipment. A simple procedure can be developed to acquire these values. This paper proposes a methodology to determine tool compensation vector and rotational compensation vector for the post pr...
متن کامل